/r/ Fuel efficient basemaps for stock D and B engines?
#11
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Originally Posted by Mista Bone
One question I need to research is would I have a use for a knock sensor?
WB02 and det cans = tuning bliss
linky linky
http://www.getglitched.com/pgmfiwiki...y/WebHome.html
http://web.archive.org/web/200702190...ibrary/WebHome
dan
#12
Guest
Posts: n/a
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Bone, here's a link to the pgmfi library, it loads a bit slow but it works
http://web.archive.org/web/200612020...ibrary/WebHome
oops just noticed the guy above me posted one too
http://web.archive.org/web/200612020...ibrary/WebHome
oops just noticed the guy above me posted one too
#13
Re: /r/ Fuel efficient basemaps for stock D and B engines?
There is no use for a Honda KS, the are only used to trim ignition at cruise for emissions purposes + the ECU promptly ignores the KS when WOT, under high load, or above 5K rpms.
#15
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Originally Posted by jagojon3
Bone, here's a link to the pgmfi library, it loads a bit slow but it works
http://web.archive.org/web/200612020...ibrary/WebHome
oops just noticed the guy above me posted one too
http://web.archive.org/web/200612020...ibrary/WebHome
oops just noticed the guy above me posted one too
Well, I now know why Dave get a little impatient with some of my questions
#17
Re: /r/ Fuel efficient basemaps for stock D and B engines?
Right now, I plan on using the free Crome, then go from there. I just need to learn the basics, tuning for MPG, then decide later when I have to tune my yet to be finished D15 insane compression motor.
14:1 using stock parts. Maybe run it on E85, but around my area it's not worth it. E85 is just .10-.20 a gallon cheaper than 87. I'm thinking a .080" Cometic HG which would put the compression at about 12-12.5:1...........
14:1 using stock parts. Maybe run it on E85, but around my area it's not worth it. E85 is just .10-.20 a gallon cheaper than 87. I'm thinking a .080" Cometic HG which would put the compression at about 12-12.5:1...........
#20
Re: /r/ Fuel efficient basemaps for stock D and B engines?
If you want 12-12.5:1 on a D, go D16Y head and make sure you have plenty of quench as it sidesteps the low end pingies. PM3 flat top pistons machined to suit a Y8 head would do the number nicely.