Problems getting fuel to lean out in crome.
05-30-2007, 10:09 AM
#1
Guest
Posts: n/a
Problems getting fuel to lean out in crome.
Well this problem is on my personal car and Ive haven't had it happen on anyone elses.
Setup it an F22a1 head f22b1 bottom end.
dsm 510cc injectors
xenocron 255lph fuel pump
stock FPR? is this the problem?
evo8 turbo on 9psi
I'm using the xenocron version of crome
Basically I have my afr in boost at 11.5 all the way up until about 5800 rpm from there in goes rich almost to 9:1.
Ive pulled an pulled fuel from the map definatly in the right cells but I can't get it to lean out to 11.5
Setup it an F22a1 head f22b1 bottom end.
dsm 510cc injectors
xenocron 255lph fuel pump
stock FPR? is this the problem?
evo8 turbo on 9psi
I'm using the xenocron version of crome
Basically I have my afr in boost at 11.5 all the way up until about 5800 rpm from there in goes rich almost to 9:1.
Ive pulled an pulled fuel from the map definatly in the right cells but I can't get it to lean out to 11.5
Thread
Thread Starter
Forum
Replies
Last Post
Turblow
Engine Management
11
03-04-2007 02:29 PM
Turblow
Engine Management
31
07-10-2006 10:42 PM
Turblow
Forced Induction
2
07-05-2006 08:57 PM
Sinner
Forced Induction
12
06-14-2003 07:17 PM
