My Crome Basemap. PLEASE HELP!
08-28-2006, 06:17 PM
#1
0.0 BAR
Thread Starter
Join Date: Apr 2006
Posts: 38
My Crome Basemap. PLEASE HELP!
Ok.. I started my car.. on my first created basemap car was idling bad and afr's were in 18-20 range..
I've added fuel and now it idles good and afr's are in 14.5-15.00 range..
I took my car for a ride and it was running very lean in 1000-3500RPM range.. I've added fuel again and now with part trottle it is in 14.00-15.00 AFR range.
on WOT in 1000-3000RPM range my car runs 13.5-14.5 AFR. in Boost after 3000RPM it runs 12.5-13.1 AFR but in 5000-5500RPM range something strange happens.. It feels like a fuel cut and my car won't rev past that.
Please somebody review my edited map and let me know what you think..
http://geotuning.com/d16z6-440cc-1deg.bin
My setup is:
My car is EDM Honda Del Sol Si (D16z6)
I'm running RC 440cc injectors
Garrett T3/TO4E 50 Trim .48 A/R
TIAL Wastegate with spring for 0.5bar (7.25psi)
I've added fuel and now it idles good and afr's are in 14.5-15.00 range..
I took my car for a ride and it was running very lean in 1000-3500RPM range.. I've added fuel again and now with part trottle it is in 14.00-15.00 AFR range.
on WOT in 1000-3000RPM range my car runs 13.5-14.5 AFR. in Boost after 3000RPM it runs 12.5-13.1 AFR but in 5000-5500RPM range something strange happens.. It feels like a fuel cut and my car won't rev past that.
Please somebody review my edited map and let me know what you think..
http://geotuning.com/d16z6-440cc-1deg.bin
My setup is:
My car is EDM Honda Del Sol Si (D16z6)
I'm running RC 440cc injectors
Garrett T3/TO4E 50 Trim .48 A/R
TIAL Wastegate with spring for 0.5bar (7.25psi)
Thread
Thread Starter
Forum
Replies
Last Post
racepak
Engine Management
0
12-01-2006 06:46 AM
Minor Threat
Engine Management
6
04-10-2006 12:11 AM
juli0_bustamante
Engine Management
4
06-27-2005 04:48 PM
FooK
Engine Management
19
05-23-2005 05:12 PM
