Motorola 2.5 bar wiring, which is which??
can anyone who has used the Motorola 2.5bar map sensor give me some insight as to what wires go where in relation to the stock map sensor on OBD1 car.
thanks. |
Re: Motorola 2.5 bar wiring, which is which??
Download the spec sheet...it tells you. 3 pins you use (1-3) and the other 3 are internal...snip them off or cover them.
Pin 1 is the one with a notch in it |
Re: Motorola 2.5 bar wiring, which is which??
motorola makes map sensors?
how many ring tones does that come with? this look familiar at all? MAP - HARNESS 3SI Updated color codes from RDMellon - Thanks! ----------------------------------------------- +5V - TPS Connector (Green/Yellow) Ground - EGTR Connector (A22 - Black) Signal - EGTR Connector (A22 - Light Green/Black) |
Re: Motorola 2.5 bar wiring, which is which??
Ah...now you've gone and made me do work.
Pin 1 to REF Pin 2 to GND Pin 3 to 5v |
Re: Motorola 2.5 bar wiring, which is which??
thanks i appreciate it!
fook, you still comming to my neck of the woods this summer? |
Re: Motorola 2.5 bar wiring, which is which??
Originally Posted by evosol
thanks i appreciate it!
fook, you still comming to my neck of the woods this summer? |
All times are GMT -5. The time now is 12:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands