Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Injector compatibility...?

Old 03-15-2004, 07:18 PM
  #1  
1.0 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 289
Default Injector compatibility...?

Okay, I finally got my 96' teg too boost, temporarily for a week running fmu. I got options here which maybe confusing. I want too run just straight high impedence 440cc', but too costly. On the other hand, i got a good deal on some Rc 550's, but there off a 1st gen talon. will those injectors be plug and play for my 96 ls with obd1 clips? or do I still have too run resistors? and yes, i'm gonna controll them with an apexi s-afc. I wanted too get the ecu chipped, but have too convert too obd1 p75, plus harness,injectors..so I figure just go with safc and bigger injectors and run 10psi. thanks for the help guys
Boost n Ls is offline  
Old 03-15-2004, 07:31 PM
  #2  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:Injector compatibility...?

Why not just pick up a set of 450's for a decent price. I see them quite a bit in the classifieds or on ebay etc. Also I think the 1g Talon injectors are Peak and Hold meaning you'd stil need resistors.
tranceminister is offline  
Old 03-15-2004, 07:49 PM
  #3  
1.0 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 289
Default Re:Injector compatibility...?

oh yeah, sorry i did forget too mention i do have a set of 450's right now, but just wanted too know if those aftermarket 550's would just plug in my stock harness w/o any hacking of my wires. Well in any case, that leads me too ask how do u run inline resistors? what resistors do i get from radio shack? and do i just splice my injector wires and solder them on inline with all four injector wires? there are two wires from each injector, which wire do i splice and run the resitors too? the black/yellow ones or the other one? thanks
Boost n Ls is offline  
Old 03-15-2004, 08:02 PM
  #4  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:Injector compatibility...?

I can't find a good diagram right now and trust me... you don't want me drawing one up for you in "Paint". Anyway if you use the inline resistors, you'll need the 10watt 10ohm resistors from Radio Shack. I beleive they come in a package of 2. And you'll want to wire them into the yellow and black stripped wires on your injectors.
tranceminister is offline  
Old 03-15-2004, 08:59 PM
  #5  
1.0 BAR
Thread Starter
 
Join Date: Dec 2002
Posts: 289
Default Re:Injector compatibility...?

ohh okay..sweet. that's all i needed too know. what if i'm using dsm clips? does it matter which way i wire them?
Boost n Ls is offline  
Old 03-15-2004, 09:03 PM
  #6  
3.0 BAR
 
Join Date: Mar 2003
Posts: 5,285
Default Re:Injector compatibility...?

You'll see on the injectors and the injector clips the + side. Just wire the clips in as usual so they fit the injectos, and wire the resistors into the yellow and black striped wires. And thats it You'll see what I'm saying when you've got the parts in front of you.
tranceminister is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
45psi
General Discussion
3
06-04-2003 05:10 PM
bobafett
General Discussion
3
06-03-2003 08:15 PM
djnikko
General Discussion
11
04-16-2003 02:41 PM
leed
Hybrid/Tech
7
03-16-2003 11:02 PM
AgentMurdoc
Hybrid/Tech
9
01-14-2003 02:50 PM


Thread Tools
Search this Thread
Quick Reply: Injector compatibility...?


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.