Bseries tranny compatibility Q's
03-15-2003, 10:54 PM
#1
3.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 3,830
Bseries tranny compatibility Q's
Beat me with a dumb shovel but I cant remember.
Can I use the clutch & PP from my 89' S1 on an 93ish cable LS tranny? This is determined by the flywheel used right? For some reason I keep thinking there was two different tranny output shaft spline counts depending on year.... must be the Down's kicking in...hey Corky!
Can I use the clutch & PP from my 89' S1 on an 93ish cable LS tranny? This is determined by the flywheel used right? For some reason I keep thinking there was two different tranny output shaft spline counts depending on year.... must be the Down's kicking in...hey Corky!
03-15-2003, 10:56 PM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:Bseries tranny compatibility Q's
92-93's Have the bigger shaft on the tranns.. I think it might be the same tooth count. But the clutch discs dont interchange.
As far as Pressure plates, I'm thinking any B-series will work out. (thinking..)
Jeff
As far as Pressure plates, I'm thinking any B-series will work out. (thinking..)
Jeff
03-15-2003, 11:03 PM
#3
3.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 3,830
Re:Bseries tranny compatibility Q's
Basically I found a LS tranny to use until I find another S1. (tired of using my roomates 20sec 'door slammer' 80 Civic)
Sounds like I'm screwed unless I can score the clutch disc with it huh?
Sounds like I'm screwed unless I can score the clutch disc with it huh?
Thread
Thread Starter
Forum
Replies
Last Post
