I really suck at chip burning!
#1
I really suck at chip burning!
Ive been trying to do this for the last couple nights and i came to the conclusion that i just suck at this! so i need a little help here guys...
ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!
ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!
#2
Re: I really suck at chip burning!
If you have already tried to burn the 27c chip it will have info on it. You need to use a UV eraser to make that chip blank if its UV erasable...if not, you're fucked basically.
Get the SST27SF512 chips...cheaper, faster and more readily available than the 29c chips.
Chris
Get the SST27SF512 chips...cheaper, faster and more readily available than the 29c chips.
Chris
Originally Posted by fast2camciv
Ive been trying to do this for the last couple nights and i came to the conclusion that i just suck at this! so i need a little help here guys...
ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!
ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!
#3
Re: I really suck at chip burning!
well i have a whole stack of these chips, i got them in a trade a while back so everytime i get an error i tried using a new chip with the same result. where can i get these other chips? do you have some chris?
#4
Re: I really suck at chip burning!
do you think there is anywhere local to me (like major retailers) that would carry this chip? like radio shack maybe? i really need to get this ---- figured out as quickly as i can! thanks for the help btw..
#5
Re: I really suck at chip burning!
You might need to try different things with it till it works...
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
#6
Re: I really suck at chip burning!
Originally Posted by 95RedEX
You might need to try different things with it till it works...
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
#8
Re: I really suck at chip burning!
Originally Posted by fast2camciv
Originally Posted by 95RedEX
You might need to try different things with it till it works...
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
I have to plug in my serial cord to the laptop, then my burner to the serial. Plug in the square end of the USB cable to the burner.
Start the burner software. Insert chip & close locking arm. Then plug in flat USB to laptop.
ID Chip. Erase Chip. & then Open and burn. When it's done. Shut down software, then remove chip.
I even had my usb & serial cords tangled up and it wouldn't ID my chip...
Thread
Thread Starter
Forum
Replies
Last Post
W O T
Engine Management
12
11-08-2005 01:40 PM