HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   I really suck at chip burning! (https://www.homemadeturbo.com/engine-management-10/i-really-suck-chip-burning-40524/)

fast2camciv 06-02-2005 09:05 AM
I really suck at chip burning!
 
Ive been trying to do this for the last couple nights and i came to the conclusion that i just suck at this! so i need a little help here guys...

ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!

Chris Harris 06-02-2005 09:33 AM
Re: I really suck at chip burning!
 
If you have already tried to burn the 27c chip it will have info on it. You need to use a UV eraser to make that chip blank if its UV erasable...if not, you're fucked basically.

Get the SST27SF512 chips...cheaper, faster and more readily available than the 29c chips.

Chris

Originally Posted by fast2camciv
Ive been trying to do this for the last couple nights and i came to the conclusion that i just suck at this! so i need a little help here guys...

ok i just bought a willem from xenocron, followed the write up in the FAQ, but the thing that is throwin me off is that i have 27256's and the write-up is for 29256's...no biggy i just changed the dips for the 27's...all is good until i try to id the chip, well the button is greyed out so i cant id it...well i read somewhere that some chips you cant id them...so i move on. i do everything like i think i should (load up my bin and all that) and then when i go to program the chip i get an error. says something like error at 0x00 so im thinkin maybe ive got the wrong chips or something? wtf? should i just get some 29256's and try it then? need a little help here, thanks guys!

fast2camciv 06-02-2005 11:03 AM
Re: I really suck at chip burning!
 
well i have a whole stack of these chips, i got them in a trade a while back so everytime i get an error i tried using a new chip with the same result. where can i get these other chips? do you have some chris?

fast2camciv 06-02-2005 11:06 AM
Re: I really suck at chip burning!
 
do you think there is anywhere local to me (like major retailers) that would carry this chip? like radio shack maybe? i really need to get this ---- figured out as quickly as i can! thanks for the help btw..

95RedEX 06-02-2005 11:29 AM
Re: I really suck at chip burning!
 
You might need to try different things with it till it works...

I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).

fast2camciv 06-02-2005 12:57 PM
Re: I really suck at chip burning!
 
Originally Posted by 95RedEX
You might need to try different things with it till it works...

I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
yea i tried a bunch of things, the jumper config is different with teh 27c's than the 29c's...tried it both ways. tried the willem and the pcb3...tried with jumper and without jumper wire...i thnk im just retarded. i guess i need to get the right chips so that i at least am doing it the same way everyone else is. is anyone using 27c256's?

bumblezc 06-02-2005 01:40 PM
Re: I really suck at chip burning!
 
Check your burner, I had this problem last summer, a little peice of soldier was chipped off. so small that I could barely see when touching it up.

95RedEX 06-02-2005 02:39 PM
Re: I really suck at chip burning!
 
Originally Posted by fast2camciv
Originally Posted by 95RedEX
You might need to try different things with it till it works...

I use 29C's, don't have to add the jumper wire, have to plug everything in in a certain order & use PCB3 instead of Willem (or whatever the other option is).
yea i tried a bunch of things, the jumper config is different with teh 27c's than the 29c's...tried it both ways. tried the willem and the pcb3...tried with jumper and without jumper wire...i thnk im just retarded. i guess i need to get the right chips so that i at least am doing it the same way everyone else is. is anyone using 27c256's?
What version of Willem software are you using? (I'm using 97g)

I have to plug in my serial cord to the laptop, then my burner to the serial. Plug in the square end of the USB cable to the burner.

Start the burner software. Insert chip & close locking arm. Then plug in flat USB to laptop.

ID Chip. Erase Chip. & then Open and burn. When it's done. Shut down software, then remove chip.

I even had my usb & serial cords tangled up and it wouldn't ID my chip... ???

fast2camciv 06-02-2005 02:50 PM
Re: I really suck at chip burning!
 
yea im using 97g i will try that wacky order when i get home! right now im down to try anything! ive been dickin with this thing for a week now and still nothing.

95RedEX 06-02-2005 04:08 PM
Re: I really suck at chip burning!
 
Yeah, I don't know why it's like that, but that's how it works.

If I can't ID a chip right away, I don't even try burning.


All times are GMT -5. The time now is 08:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands