f22a6 BIN ???
Thread Starter
1.0 BAR
Joined: May 2006
Posts: 295
f22a6 BIN ???
anyone know where I can find a f22a1 basemap, or bin file to use in an obd1 p28 ecu.
I would use the f22b bin i found, but I don't know the differences, and would liike to find the correct bin file.
I would use the f22b bin i found, but I don't know the differences, and would liike to find the correct bin file.
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: f22a6 BIN ???
Crome offers some limited ability to read non-Civic/Integra .bin files, even OBD2 ones, found here: http://www.pgmfi.org/twiki/bin/view/...efinitionCodes (perusing pgmfi.org wiki for hours until intimately familiar is a rewarding endeavor)
Interlaced fuel maps look... haha... ------- useless? But, you can pull real-world useable timing maps out of. The Prelude F22A .bin opens in Crome 1.2 Final installed on this computer, one of the 90-93 PT3 .bins did not.
Interlaced fuel maps look... haha... ------- useless? But, you can pull real-world useable timing maps out of. The Prelude F22A .bin opens in Crome 1.2 Final installed on this computer, one of the 90-93 PT3 .bins did not.
Guest
Posts: n/a
Re: f22a6 BIN ???
Damn JD thanks, I knew that crome had some support for the p12 ecu and that some preludes had f22a1's in them. I just didn't put it together. I'm going to try the prelude timing map later today. Comparing the f22b vtec and the f22a1 maps the B is way advanced by 7 degrees in some cases.
3.0 BAR
Joined: Mar 2006
Posts: 5,631
Re: f22a6 BIN ???
Originally Posted by Dmc1
Damn JD thanks, I knew that crome had some support for the p12 ecu and that some preludes had f22a1's in them. I just didn't put it together. I'm going to try the prelude timing map later today. Comparing the f22b vtec and the f22a1 maps the B is way advanced by 7 degrees in some cases.
LMK.
Brian
Thread Starter
1.0 BAR
Joined: May 2006
Posts: 295
Re: f22a6 BIN ???
yea, please send me a copy.
His car is currently stock... but plans are for a 14b, drilled dsm manifold, 450's, and a few others
Thanks all for your help. I believe Ill ship him a vtec disabled p28, and a f22a bin.
His car is currently stock... but plans are for a 14b, drilled dsm manifold, 450's, and a few others
Thanks all for your help. I believe Ill ship him a vtec disabled p28, and a f22a bin.
3.0 BAR
Joined: Mar 2006
Posts: 5,631
Re: f22a6 BIN ???
Originally Posted by StinkyFeet
yea, please send me a copy.
His car is currently stock... but plans are for a 14b, drilled dsm manifold, 450's, and a few others
Thanks all for your help. I believe Ill ship him a vtec disabled p28, and a f22a bin.
His car is currently stock... but plans are for a 14b, drilled dsm manifold, 450's, and a few others
Thanks all for your help. I believe Ill ship him a vtec disabled p28, and a f22a bin.
Good luck, seems as thouygh some others are having good luck with it, so i hope it works out for you.
Spike
Guest
Posts: n/a
Re: f22a6 BIN ???
Yeah Jd I tryed those timing maps from the p12 and the car ran a lot smoother. I onlt datalogged for about two minutes because I have my lm-1 emulating the o2 sensor right now.*L* I turned on freelogg and saw af's of like 7.1 and was like what the ---- then oh yeah it's set on the narrow band slope!
Hey spike I looked at your bin and it's timing is the same as the other bin I was using. I may use it for when I boost this thing. It totally freaking sucks Ive got all the parts Ive been ready to do the instal for two months now. Ive just been so busy I haven't had the time. maybe this weekend though.
Hey spike I looked at your bin and it's timing is the same as the other bin I was using. I may use it for when I boost this thing. It totally freaking sucks Ive got all the parts Ive been ready to do the instal for two months now. Ive just been so busy I haven't had the time. maybe this weekend though.
Thread
Thread Starter
Forum
Replies
Last Post
