f22a6 BIN ???
 

anyone know where I can find a f22a1 basemap, or bin file to use in an obd1 p28 ecu.
I would use the f22b bin i found, but I don't know the differences, and would liike to find the correct bin file.

Re: f22a6 BIN ???
 

where did you find the f22b bin?

look in xenocrons uberdata directory, I have an f22a1 bin posted.

Re: f22a6 BIN ???
 

That ,accord stock vtec p28 vtec, bin works really good just disable vtec in crome for the non vtec f22a1 and your good.

Re: f22a6 BIN ???
 

Crome offers some limited ability to read non-Civic/Integra .bin files, even OBD2 ones, found here: http://www.pgmfi.org/twiki/bin/view/...efinitionCodes (perusing pgmfi.org wiki for hours until intimately familiar is a rewarding endeavor)

Interlaced fuel maps look... haha... ------- useless? But, you can pull real-world useable timing maps out of. The Prelude F22A .bin opens in Crome 1.2 Final installed on this computer, one of the 90-93 PT3 .bins did not.

Re: f22a6 BIN ???
 

Damn JD thanks, I knew that crome had some support for the p12 ecu and that some preludes had f22a1's in them. I just didn't put it together. I'm going to try the prelude timing map later today. Comparing the f22b vtec and the f22a1 maps the B is way advanced by 7 degrees in some cases.

Re: f22a6 BIN ???
 

If it helps, everyone who ive sent my f22b1 bin to has been having pretty good luck... (not sure of your setup), but if you would like...Id be more than happy to send it to you. (10 psi t3/04e .48/.50 57 trim stage 3 with 450s and stock map sensor)

LMK.

Brian

Re: f22a6 BIN ???
 

yea, please send me a copy.

His car is currently stock... but plans are for a 14b, drilled dsm manifold, 450's, and a few others

Thanks all for your help. I believe Ill ship him a vtec disabled p28, and a f22a bin.

Re: f22a6 BIN ???
 

Sent.

Good luck, seems as thouygh some others are having good luck with it, so i hope it works out for you.

Spike

Re: f22a6 BIN ???
 

Yeah Jd I tryed those timing maps from the p12 and the car ran a lot smoother. I onlt datalogged for about two minutes because I have my lm-1 emulating the o2 sensor right now.*L* I turned on freelogg and saw af's of like 7.1 and was like what the ---- then oh yeah it's set on the narrow band slope!

Hey spike I looked at your bin and it's timing is the same as the other bin I was using. I may use it for when I boost this thing. It totally freaking sucks Ive got all the parts Ive been ready to do the instal for two months now. Ive just been so busy I haven't had the time. maybe this weekend though.