ECU question on swap
02-12-2007, 09:15 PM
#1
1.0 BAR
Thread Starter
Join Date: May 2006
Posts: 299
ECU question on swap
Have a ZC with a mini me. OBD0 of course, but its running a PM8? Which I was pretty sure was the HF ecu, also limits at 5500, I threw my buddy's PM6 in there today and was able to take it up to about 7300.
Question is, is it didnt want to run right at all from 1-4k and (spuddering horribily) and after 4k it took off like a bat out of hell.
Do I just need to let my car sit and run and get use to the Pm6 or what?
Question is, is it didnt want to run right at all from 1-4k and (spuddering horribily) and after 4k it took off like a bat out of hell.
Do I just need to let my car sit and run and get use to the Pm6 or what?
02-12-2007, 10:43 PM
#2
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: ECU question on swap
Originally Posted by GSREX
Have a ZC with a mini me.
Neither of those ECUs you are running are right for that setup...this is your problem.
Convert to OBD1 and do it right or get a chipped PR3/PW0 and get it tuned on BRE
02-12-2007, 10:46 PM
#3
!! UNCONFIRMED EMAIL !!
Join Date: Dec 2002
Posts: 6,656
Re: ECU question on swap
Originally Posted by xenocron
Does this mean you are VTEC?
Neither of those ECUs you are running are right for that setup...this is your problem.
Convert to OBD1 and do it right or get a chipped PR3/PW0 and get it tuned on BRE
Neither of those ECUs you are running are right for that setup...this is your problem.
Convert to OBD1 and do it right or get a chipped PR3/PW0 and get it tuned on BRE
i agree with him... you made no since and you need to swap to OBD1...
Thread
Thread Starter
Forum
Replies
Last Post
