datalogging problems
thanks
Thread Starter
1.5 BAR
Joined: Aug 2004
Posts: 710
Re: datalogging problems
still cant get it to work. and no j12 is not easy to ------- see. the resistor was smaller than *******'s dick. so i had to whip out the microscope - found it and took it out, pluged in cable to compy, started up car = NOTHING. could it be that datalogging was not activated on the ecu when the chip was burned? thanks
3.0 BAR
Joined: Jan 2004
Posts: 5,704
Re: datalogging problems
are you trying to datalog with crome?? if you are its never going to work being that it doesnt have the feature built in. i have not datalogged myself but i would search on pgmfi to get the necessary steps. jago lay off him clearly you messed up too 
Thread Starter
1.5 BAR
Joined: Aug 2004
Posts: 710
Re: datalogging problems
no acutally u are the one who messed up. with the uberdata you have dont have to cut the j12 resistor because yes it is already built in to read it. but with crome all you have to do is cut the j12 and hook it up and you should be good. i already talked to xenocron or watever and he even said they come with uberdata. :1
3.0 BAR
Joined: Jan 2004
Posts: 5,704
Re: datalogging problems
Originally Posted by DeleriouS
no acutally u are the one who messed up. with the uberdata you have dont have to cut the j12 resistor because yes it is already built in to read it. but with crome all you have to do is cut the j12 and hook it up and you should be good. i already talked to xenocron or watever and he even said they come with uberdata. :1
Thread Starter
1.5 BAR
Joined: Aug 2004
Posts: 710
Re: datalogging problems
Originally Posted by DeleriouS
but with crome all you have to do is cut the j12 and hook it up and you should be good. i already talked to xenocron or watever and he even said they come with uberdata. :1
Thread
Thread Starter
Forum
Replies
Last Post
hamburgler
Engine Management
2
Jul 22, 2007 08:26 PM
