HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   datalogging problems (https://www.homemadeturbo.com/engine-management-10/datalogging-problems-50185/)

DeleriouS 11-16-2005 03:29 PM

datalogging problems
 
yes i have searched but couldnt find, so dont flame.

well i installed crome and it is ------- fast at only 7psi. but i want to know what is going on in my motor with the datalogging and i cant figure it out. i i i cant figure out what program to use 1. for the usb connector i have, and 2. for the datalogging.

i got a program called ECUcontrol and i cant figure out how to get a live reading from my datalogging cable from my ecu.

need help thanks

DeleriouS 11-16-2005 06:05 PM

Re: datalogging problems
 
bumb....come on...no one here knows how to datalog?

HMTguy 11-16-2005 06:44 PM

Re: datalogging problems
 
You are a dumb sack of ---- once again.

You are using Crome.... so that is the program you use to datalog.

If you are using a serial->USB adaptor then google for drivers. I'm not even gonna tell you where they are if you can't find them.

I also thought you might be hungry... so here ya go

http://www.homegrocer.com/images/pro...am%20gravy.gif

DeleriouS 11-16-2005 10:56 PM

Re: datalogging problems
 
i have a usb driver program i just need to figure out how to get a live feed from the car.

HMTguy 11-17-2005 08:16 AM

Re: datalogging problems
 

Originally Posted by DeleriouS
i have a usb driver program i just need to figure out how to get a live feed from the car.

You plug in your datalogging cable, turn the car on, BAM you got a live feed

95RedEX 11-17-2005 10:57 AM

Re: datalogging problems
 
I don't think the free version offers datalogging. I guess for that you have to use ECU Control.

I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.

Good luck. :8

DeleriouS 11-17-2005 11:27 AM

Re: datalogging problems
 

Originally Posted by jagojon3
You plug in your datalogging cable, turn the car on, BAM you got a live feed

no jack off it doesnt do that, hense me posting dumbass


Originally Posted by 95RedEX
I also thought there was a slight difference in hardware setup for Uber & Crome. If you're using an Uber ECU, there's some kind of jumper change, but I don't know what it is.

someone once said something about cutting a jumper wire or something like number j12 or some ----. is that what you are talking about? i have no idea where that is. HELP!!! :S

93turbo16 11-17-2005 01:44 PM

Re: datalogging problems
 
yes for all datalogging except for uber, you have to cut or remove Jumper at J12.

Try using Cuddle for datalogging. It is on the PGMFI.org forum. John wrote that as well I believe.

If you want datalogging integrated into the program try uberdata.

HMTguy 11-17-2005 02:02 PM

Re: datalogging problems
 

Originally Posted by DeleriouS

Originally Posted by jagojon3
You plug in your datalogging cable, turn the car on, BAM you got a live feed

no jack off it doesnt do that, hense me posting dumbass

Then you fucked something up, or assuming it's you, DIDN'T READ THE FAQS.

You are a scab, a disease on this society we know as HMT. Go fist your grandma, it'd be more productive than anything you do to your car.

DeleriouS 11-17-2005 03:57 PM

Re: datalogging problems
 
another retarded and illogical response from our very own JACKOFF


All times are GMT -5. The time now is 10:27 PM.


© 2024 MH Sub I, LLC dba Internet Brands