surfer

Ok so i wiped everything and re installed it, still the same problem.

I should also say that this is on a romless ecu, whether that makes a difference i dont know

splitime

Want to explain this? I'm not sure what you mean by it.

surfer

yeah i got rid of turboedit and all its components from my hard drive and then reinstalled everything

The ecu I am using is a romless ecu that has been converted to accept an external eeprom, whether this would make a difference to anything I dont know

splitime

Hum, so its an 88-89 non-chippable format ecu? Is it possible that the modifications didn't work out perfectly?

Do you have a normally chippable 90-91 ecu you could use to test your bin file?

surfer

thing is, it works okay in vac just not in boost, that doesnt sound like it would be a problem within the modifications of the ecu.

I'm in the process of building another, this time using a PM7, dev board, ribbon cable and my proper soldering station, I'll post up if that goes to ---- as well.

Unfortunately the only chippable ecu I have available has a couple of damaged tracks so intermittently throws codes

surfer

man how ------- retarded am i, I forgot to link out the internal rom to make it read from the external.

Thanks for the help guys

splitime

Giggle... I was going to say... your issue sounded like it was map seeing boost... but with TE rom... that shouldn't be issue.

Glad you figured it out... you are a better man than I doing the external eprom route instead of just using the chippable ones.