Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

Code 3 using TE

Old 02-04-2006, 02:31 PM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Code 3 using TE

Just made a basemap for my mates twin cam D with turboedit and got a code 3 when I stomped on the gas, I thought that code 3 had been removed from the boosted roms, either it has been reinstated recently or could it be because the injectors exceeded maximum duty cycle in the boosted portion of the map?
surfer is offline  
Old 02-05-2006, 12:42 PM
  #2  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Re: Code 3 using TE

anyone?
surfer is offline  
Old 02-05-2006, 12:53 PM
  #3  
3.0 BAR
 
Join Date: Jul 2003
Posts: 6,449
Default Re: Code 3 using TE

It was never added back in...hell, they havent done any development in months.

But, are you sure its not an actual MAP sensor problem?
Chris Harris is offline  
Old 02-05-2006, 12:58 PM
  #4  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Re: Code 3 using TE

i dont think there is a problem with the map sensor, i will swap in a spare tomorrow.

It shouldnt even throw a 3 when it overboosts should it!
surfer is offline  
Old 02-05-2006, 01:25 PM
  #5  
1.0 BAR
 
Join Date: Apr 2004
Posts: 240
Default Re: Code 3 using TE

Originally Posted by xenocron
It was never added back in...hell, they havent done any development in months.

But, are you sure its not an actual MAP sensor problem?
Heh, not quite true. We got maptrace/datalogging functioning last night Autotune/gauges/etc are in the works.

Is the map setup for Dual Map? Make sure it is, otherwise its just an NA map and has no boost area. (from what I remember... all my TE maps are boosted at this point )
splitime is offline  
Old 02-05-2006, 01:37 PM
  #6  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Re: Code 3 using TE

Yes it is a boost .bin
surfer is offline  
Old 02-06-2006, 11:47 AM
  #7  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Re: Code 3 using TE

ok so i swapped the map sensor and its still throwing a code 3
surfer is offline  
Old 02-06-2006, 11:59 AM
  #8  
1.0 BAR
 
Join Date: Apr 2004
Posts: 240
Default Re: Code 3 using TE

What basemap are you using? What version of TE are you using? Did you use Xeno's basemapper? If all wiring is right... the chip should work 100%

splitime is offline  
Old 02-06-2006, 12:40 PM
  #9  
1.5 BAR
Thread Starter
 
Join Date: Nov 2003
Posts: 771
Default Re: Code 3 using TE

NG60_18

TE 2.5.0.5 from pgmfi

didnt use xeno's basemapper, there is no need as of yet i was just wanting to test it out.

I'm going to download NG60 again, and use 2.5.2 to modify the map.

There is nothing wrong with the wiring as it was fine when it was NA and nothing else has changed
surfer is offline  
Old 02-06-2006, 03:53 PM
  #10  
1.0 BAR
 
Join Date: Apr 2004
Posts: 240
Default Re: Code 3 using TE

Make sure you download and install TE from www.turboedit.org (version 2.5.2)
Then goto http://forum.pgmfi.org/viewtopic.php?t=7520 and download the 2.5.5 exe file into your TE folder.
Running that and using the NG60 maps... you should have 0 issues.
splitime is offline  

Thread Tools
Search this Thread
Quick Reply: Code 3 using TE


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.