Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

bogging and stalling?

Thread Tools
 
Search this Thread
 
Old Jul 6, 2003 | 04:40 PM
  #1  
kine462's Avatar
Thread Starter
1.0 BAR
 
Joined: Jan 2003
Posts: 209
Default bogging and stalling?

finally boosted after 1.5 years of research trips to various junkyards. dsm t-25 off a elcipse, d16y8 obd2 obstical.. no check engine lights, but ever so often at partial throttle it will bogg and jerk....my a/f gauge will go from lean to stoich.... when it's running ok (every so oftem)it will ready i green bar past rich?? could it be a fuel problem? faulty injector maybe??
Old Jul 6, 2003 | 04:53 PM
  #2  
Dr.Boost's Avatar
3.0 BAR
 
Joined: Mar 2003
Posts: 21,468
Default Re:bogging and stalling?

I have the same problem right now. In my case it's the fuel. I'm running super rich at idle and leaning out up top. It gets jerky when I try to take off easy. I just try to punch it everytime I take off now.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Old Jul 6, 2003 | 04:56 PM
  #3  
kine462's Avatar
Thread Starter
1.0 BAR
 
Joined: Jan 2003
Posts: 209
Default Re:bogging and stalling?

sounds good to me... are you using smc, or afc??when i am cruising partial throttle(vacuum) it will bogg and run way into the lean.. will this hurt since i am not boosting yet?
Old Jul 6, 2003 | 04:58 PM
  #4  
Dr.Boost's Avatar
3.0 BAR
 
Joined: Mar 2003
Posts: 21,468
Default Re:bogging and stalling?

I'm using a custom chip right now. I'm trying to tune it with an AFC, but it only works to a point. I'm waiting for a burner.

It's probably not too good on your motor, but at low rpm and low load it's probably not going to blow your motor up anytime soon. I would try and get it fixed though. What are you using for fuel management?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Old Jul 6, 2003 | 05:00 PM
  #5  
kine462's Avatar
Thread Starter
1.0 BAR
 
Joined: Jan 2003
Posts: 209
Default Re:bogging and stalling?

smc dual and 450cc dsm's
Old Jul 8, 2003 | 12:54 AM
  #6  
Chacko's Avatar
1.5 BAR
 
Joined: Dec 2002
Posts: 1,495
Default Re:bogging and stalling?

This potentially could also be the retarded timing, your engine has to take an extra set of revolutions to 'catch up' with itself. This should especially be worse when the engine is being run on a cold start.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sunboost
Forced Induction
9
May 31, 2007 03:52 PM
chr1z
Forced Induction
2
Jul 15, 2005 11:24 PM
wdwalker
Engine Management
45
Feb 17, 2005 09:29 AM
bmxunderground
Forced Induction
16
Jul 4, 2003 05:00 PM
scttydb411
Forced Induction
4
May 20, 2003 08:12 PM




All times are GMT -5. The time now is 05:25 AM.