GimpyCivic

there is the HF -> T3 plate i got! Ignore the blue ----, thats just packing tape residue. Its TOP notch and it fits my VW T3 -> HF perfectly

sgoertz

That particular adapter was made to fit a turbonetics turbo which has 16% larger exhaust inlet. I have stopped making them unless requested because I suspect there are not many Turbonetics being put on a D series engine. Thank you for all of your positive comments. For those who suspect problems with the DSM Turbos such as the T25 or TD05, I am working on a re-design to solve the problem with some of the turbos not being able to bolt thru.

-Sam

djsa1

Hey whats up I have a 14b tdo5 turbo and have a HKS turbo header which accepts T25 garret turbos, what i need is an adapter that would enable me to use the 14b on this header.
If you think this would be possible to make?
Thanks email me if you can.
nikkidanderson@yahoo.com

GimpyCivic

Here is the above HF->T3 adapter mated to the HF manifold. And yaya I don't wanna hear it, I can't find any 10x1.5 cap socket bolts in my area. I live in Iowa and finding metric fasteners of any sort is the suck:

sgoertz

For those of you having trouble finding the Socket Head Cap Screws (SHCS), I have heard that Ace Hardware sells them. Also if you can find them online at:

www'mcmaster.com
Part No. 91290A520
Metric Class 12.9 Alloy Socket Head Cap Screw M10 Thread, 25mm Length, 1.5mm Pitch
$ 5.19 per Pack
This item is only sold in Packs of 25

Those of you needing 8-1.25MM, they are also available.

-Sam

jdmcrx1

hey Bmc, I need a plate for a hf mani, to a 14b. pm me will price and shipment info. and paypal address.

Tony

lazyassbrian

is this flange done yet? i'm interested in picking one up. let me know.

thanks,
brian

Dan-O

Bump...

Sam,
My T3 to first gen CRX manifold adapter showed up yesterday. Very nice. It should work perfectly.
I posted your address to a first gen CRX sight so others can enjoy your work.
Thanks.
Dan-O

crxrx7

Have ever heard of this turbo. K24. Its a kkk turbo. Its a little bit bigger that a T3. If you have I could use an addapter plate to an HF manifold. I would also like a downpipe flange. If anything I could draw it up on my drafting board with very detailed dementions. or a crayon rubbing. I don't like to send my turbos out to people for fear they would get lost or stolen. Thank you very much.
Scooby Racer

rextec

dan-o sent me over to you for a first gen hf adapter. i need one that will bolt on to the first gen hf mani. to a 14b turbo, can this combination be done without the holes interfearing with each other?
e-mail me at jaber023@yahoo.com
thanks