so i pulled this turbo off an international harvester diesel engine, its a To4B18, .60a/r cold, 1.32a/r hot, i have no idea about any other specs on it, but it spins perfect and has no play at all.
now my car is a 94 accord with the f22b2. my question is, well im pretty sure the answer is no, but do you guys think i could even get this thing to spool? if not, is it possible to put a t3 exh housing on it, with a .63, or .48a/r? here are some pics....(not the actual one, but the same thing)




i figure since i got it for free, i cant really go wrong, even if i end up selling it

 

thats pretty badass free turbo. i dont know if it would spool on an accord but either way you lucked out

 

If you were building an sfwd motor, then you would be okay with the T4 1.32ar but as a street car, it would be rather unsuitable. However I am sure you could find a smaller T4 turbine to put on there. Iirc going to a T3 Hotside would require a turbine wheel change as well.

 

Put a 150 shot on it, it will spool just fine

 

i say rock it.. .the 2.2 will spool it might be around 6k but it will spool. and watch the ---- out when it dose..

 

------- DO IT!! Clean the sand out of your VAG and DO IT!!!

 

that looks like a t6 inlet bro

 

Exhaust sides a bit big... FOr a stock block f, COmpressors money... Its a T4.


---- it, try it. LOG is your friend

 

block off plate.

 

yep as he said block off one scroll. poor mans smaller hot side