Boost please
Guest
Posts: n/a
Boost please
Okay i'm going to be running a t3 turbo (don't know the trim size sorry) on my LS/vtec on stock pistons and rods (for now), anyone have an idea on what i can boost safely on the stock internals? B18A1 block with new rings and bearings, GSR head. Both are OEM minus cam gears.
Sorry for the newbee question i'm new to turbos.
Sorry for the newbee question i'm new to turbos.
0.0 BAR
Joined: Jun 2006
Posts: 22
Re: Boost please
yeah what layer head gasket do u have and your block fine for boost just dont lean out make sure u run rich my advise is to spend som extra money and get a wide band and set it to about 11:1 or so just to be safe and boost 11psi and have fun with 300 or so hp...
Guest
Posts: n/a
Re: Boost please
Originally Posted by k20turbotyper
yeah what layer head gasket do u have and your block fine for boost just dont lean out make sure u run rich my advise is to spend som extra money and get a wide band and set it to about 11:1 or so just to be safe and boost 11psi and have fun with 300 or so hp...
0.0 BAR
Joined: Jun 2006
Posts: 22
Re: Boost please
well thats fine that ur running the p28 infact its better it will be easier to tune it on 91 octane u can get it tuned safely on 10-12psi and ur car will rip i live in cali so i know its hard to get anything else than 91 just make sure ur air/fuel ratio is right thats what will make ur car detonate..what size injectors r u running and is the t3 after market or volvo t3 or somthing like that...
Guest
Posts: n/a
Re: Boost please
Originally Posted by k20turbotyper
well thats fine that ur running the p28 infact its better it will be easier to tune it on 91 octane u can get it tuned safely on 10-12psi and ur car will rip i live in cali so i know its hard to get anything else than 91 just make sure ur air/fuel ratio is right thats what will make ur car detonate..what size injectors r u running and is the t3 after market or volvo t3 or somthing like that...
will my stock LS pistons and rods hold 10-12 psi?
0.0 BAR
Joined: Jun 2006
Posts: 22
Re: Boost please
ohhhh yes for sure my freind had a 2000 si with an ls vtec in it it was tuned with chrome and he got it tuned on 91 octane and he boosted 18 psi at the track stock internals it dynod at 341whp at 18 psi thats pretty good considering it was a stock lsvtec he ran a 12.6@116 mph but it looses traction really easy just keep it safe and make sure make sure u get it wide baned or u will pop that bitch like a zit...
Guest
Posts: n/a
Re: Boost please
Originally Posted by k20turbotyper
ohhhh yes for sure my freind had a 2000 si with an ls vtec in it it was tuned with chrome and he got it tuned on 91 octane and he boosted 18 psi at the track stock internals it dynod at 341whp at 18 psi thats pretty good considering it was a stock lsvtec he ran a 12.6@116 mph but it looses traction really easy just keep it safe and make sure make sure u get it wide baned or u will pop that bitch like a zit...
I think i'm gunna get the LSD tranny for my LSv....then after that comes the forged pistons/rods...any other suggestions for the motor?
My whole setup t3 turbo-rear ended volvo, rebuilt
SMIC from DSM
440 Injectors
b16 cams (had skunk2 all motor cams and traded for a lot of ----)
DSM BOV
3" downpipe-exhaust (no cat)
0.0 BAR
Joined: Jun 2006
Posts: 22
Re: Boost please
right away ur going to need a fmu get one on ebay for 90$ or u can find one on hmt but ur going to need a/f gauge and boost gauge oil line kit or u can custom make one and a boost controller 20$ on ebay side mount will be fine i love the hidden look lol its hella funny when u roll up on someone and they dont even know ur boosting lol..but yeah my freinds si had a
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
Guest
Posts: n/a
Re: Boost please
Originally Posted by k20turbotyper
right away ur going to need a fmu get one on ebay for 90$ or u can find one on hmt but ur going to need a/f gauge and boost gauge oil line kit or u can custom make one and a boost controller 20$ on ebay side mount will be fine i love the hidden look lol its hella funny when u roll up on someone and they dont even know ur boosting lol..but yeah my freinds si had a
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
3.0 BAR
Joined: Oct 2005
Posts: 3,450
Re: Boost please
Originally Posted by k20turbotyper
right away ur going to need a fmu get one on ebay for 90$ or u can find one on hmt but ur going to need a/f gauge and boost gauge oil line kit or u can custom make one and a boost controller 20$ on ebay side mount will be fine i love the hidden look lol its hella funny when u roll up on someone and they dont even know ur boosting lol..but yeah my freinds si had a
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
b18b block
b16 head
full msd ignition
91 octane
18psi
tuned
3 inch exghaust
he had a t3/t4 kit off ebay thought
thats pretty much it he just had a really good tune and he was on 22" slicks on that run
