I plan on running the oild cooler sandwich to an oil cooler, do you think I could run a feed line to that manifold, the 2 out? one to the turbo, the one through the oil cooler and back into the sandwich?

 

On the return line from the cooler, just get a simple fitting to allow a #3 or #4 fitting to feed the turbo.

That log you are showing won;t flow enough, likely killing your motor.

 

You sure, It has a 1/2 bore through it.

I cant do the return from the cooler. Because the oil has to return to the oil sandwich. so unless I run presuure straight through the turbo, return line to the oil sandwich and not the oil pan, and smoke like hell!

I know I can use the standard oil feed but I dont' want millions of oil lines.

 

Bump. I need more opinions. Anybody think I can do it?