Dr.Boost

I think the only issue would be the distibutor wiring. You would have to move some pins and wire the cam angle sensor in. That's no biggie. Other than that I think it plugs right in.

BTW, we are still on for that head swap right? It should be coming your way Monday.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

nonvtec

hmm, alright, I'll keep looking about the wiring, yeah we're still on... It will take me a day or two to swap it if the weather doesn't warm up here in PA Then I'll ship her out. Did you send the MO yet?

Dr.Boost

Er, what money order? ----, I forgot I still had to pay you. I'll send that out Friday if that's cool. I spent too much money. I'm in no hurry so you can pull the head anytime you want.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

nonvtec

That's cool, I'll be in no hurry for the MO as long as you don't need the head immediately. Yeah, just send it out Friday.

Carnesd

ZC's have no torque, I think my a6 pulled harder at lower rpm's, If I could do it again I would have saved my $1000 and spent it on turboing my a6.

nonvtec

Don't you think the ZC's bottom end is stronger than an A6? Thanks for the input.

Carnesd

I've heard that they are but never taken them out and compared. Jeff might know.

Semnos

Just plug the ZC in. Get a manual I think some sensors will be left out...depends on what year ZC you got, cause here we got them from 88-92(black top OBD0 ZC) And not all of them are the same D16A9 and D16Z5..both DOHC. I heard of some of them being sold in the US.
Chip a P06 or a P28 ecu and tune it.....It should run perfect if you got it tuned right. a SOHC dizzy will work....only you won't use the sensor on the exhaust cam anymore cause it's build in the SOHC dizzy. You do need a OBD1 dizzy...cause the OBD0 dizzy won't work...something about different tooth count.

15psiZC

my roommate did a swap like this 2 years ago into a 94 ex 4dr the engine bolts right in and there are virtually no problems with the wiring harness, just ignore the crank angle sensor and if the car started out as vtec just leave the vtec solenoid plugged in and zip-tie it somewhere out of the way, use all the sensors that came with the car and you should have no problems. also you must use the obd1 distributor

hotrex

sohc vtec. more parts available. and same amount of power.