Y1 tranny

Reply Subscribe

Thread Tools

Search this Thread

06-06-2003, 06:16 PM

OnYx

3.0 BAR

Thread Starter

Join Date: Nov 2004

Posts: 5,101

Y1 tranny

I have a B16A1 and got it in a after abotu a week tried a peal out seeing i though it was gripping a bit more than usual. it left side by side tracks!! no wheel hop wahts so ever! I checked the tranny before i put it in and it was a stock non-LSD tranny (pole in the middle of the diff). I want to know how i can tell if its been welded or if something else can be going on! I LOVE IT but i want to know what was done to it. BTW it turns on a dime without a problem. no hopping or anyhting.

06-06-2003, 08:43 PM

88crxSi

3.0 BAR

Join Date: Feb 2003

Posts: 9,089

Re:Y1 tranny

my d16 stock Si tranny leaves two marks aswell.

06-06-2003, 08:49 PM

OnYx

3.0 BAR

Thread Starter

Join Date: Nov 2004

Posts: 5,101

Re:Y1 tranny

the problem is that i have driven several VTEC cars and never had the same affect. this one hooks up hard and there is no tourque steer

06-09-2003, 02:40 AM

Turbo90Accord4DR

Guest

Posts: n/a

Re:Y1 tranny

to check if it has a welded diff just jack it up and spin 1 tire if the tire spins the same way then its welded (it turns the same way at the same rotation not faster not slower) or you can have someone try and hold one tire while you try and turn the other(in nutral)... I dont have an LSD and i can do 2 wheel burnouts all day long. they just do that.