WTF??!!??!?!?!?!?!??!
06-02-2008, 11:13 PM
#41
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: b series swap list
Originally Posted by crxvtec91
Damn that might be a bit much for the sleeves. BTW you have my username spelled wrong in your sig.
My old boss made low 400's on a bone stock b20b bottom end like 8 years ago. No worries on that set up. Hell My buddy had a b20b turbo set up with and fmu 15 pounds and the motor never broke. Car was a low 12 sec all day long and never had any problems
The limit of those sleeves is way beyond what a typical street car will make. hell even jeff franks made 300 and ran like a champ without any real tuning but butt dyno action
06-03-2008, 12:22 AM
#43
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: b series swap list
Originally Posted by chris
oh and my bosses old car ran low 10's on that motor for a full season. motor finally blew up with a 50 shot on top of the 30+ psi from the super 60
06-03-2008, 12:46 AM
#44
3.0 BAR
Join Date: Jul 2006
Posts: 2,349
Re: b series swap list
Originally Posted by 78NOVA
ok after thinkin about ---- here and there i wanna go to a b series engine because after reading about what chris said and others, it seems as though its the better choice in the long run after everything is said and done. i started to compile a parts list and i think i know waht i need to get, but i just want to make sure im doing this right. i already got a good heads up on my parts because of parts galore. the motor will be rebuilt from the ground up to ensure a good healthy running engine.
B20b motor- coming shortly
b series into ef mounts- coming shortly
b series trans- junkyard scavenger
b series axles- junkyard scavenger
90-91 integra knuckles or 91 civic sedan ex knuckles- junkyard scavenger
pr4 obd1/obd0 ecu(Im going to convert to obd1)- i already have these items
can i use my current engine harness which was mpfi converted and currently driving with d series, then get obd1 conversion harness.
as far as i can think this is all i would need from the junkyard to get me started. the only thing thats gets me is the steering knuckles and hubs. thats one of the reasons why i made this thread. i should be heading to the junkyard saturday and picking everything up. gotta love the import section.
big thumbs up to chris for the HMT hookup on the b20b short block.
B20b motor- coming shortly
b series into ef mounts- coming shortly
b series trans- junkyard scavenger
b series axles- junkyard scavenger
90-91 integra knuckles or 91 civic sedan ex knuckles- junkyard scavenger
pr4 obd1/obd0 ecu(Im going to convert to obd1)- i already have these items
can i use my current engine harness which was mpfi converted and currently driving with d series, then get obd1 conversion harness.
as far as i can think this is all i would need from the junkyard to get me started. the only thing thats gets me is the steering knuckles and hubs. thats one of the reasons why i made this thread. i should be heading to the junkyard saturday and picking everything up. gotta love the import section.
big thumbs up to chris for the HMT hookup on the b20b short block.
D SERIES OR BUST!
06-03-2008, 12:55 AM
#45
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: b series swap list
Originally Posted by crxvtec91
Hum not bad, so what is the hmt discount shipped for one of these motor. Pm me, 07504. Also do you start up warranty?
06-03-2008, 10:09 AM
#46
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: b series swap list
Originally Posted by chris
well considering they dont have heads they wont start. There fine you wont have a problem. I sell ungodly amount of crap every month and have no intent to rip people off to make a couple bucks
06-03-2008, 12:35 PM
#47
3.0 BAR
Thread Starter
Join Date: Dec 2005
Posts: 2,299
Re: b series swap list
sounds like a 50-75 shot may not be a bad thing to do then if i just wanna have fun with people on the streets. i know i get plenty of looks in my hatch when driving to school from other honda drivers and wrx/evo's as well. gotta love rolling with porches though.
06-03-2008, 04:48 PM
#48
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: b series swap list
Originally Posted by crxvtec91
Lol no, no. I ment if I throw a head on it, and its no good; then what? I know your not here to rip any one off, I seen you here for a long time; and have bought from you and the past. The only reason I ask was because I use to work at a engine importing place and I would say about 1 b-series motor out of every 150 or so where no good.
None of my stuff isnt good all is tested twice. I have never had a motor/trans returned and that is due to overally ---- testing.
Also in all my days of swapping in jdm motors I have had =0 that were damaged on start up/or worn beyond what is expected in a used motor
Thats 10+ years of shop work/friends cars/personal cars. If the place you worked at compression/leaked down correctly there would of been 0 damaged motors
that came over on the boat
06-03-2008, 05:02 PM
#49
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: b series swap list
Originally Posted by crxvtec91
Lol no, no. I ment if I throw a head on it, and its no good; then what? I know your not here to rip any one off, I seen you here for a long time; and have bought from you and the past. The only reason I ask was because I use to work at a engine importing place and I would say about 1 b-series motor out of every 150 or so where no good.
Fine if it doesnt run send it back and you get your money back good enough. But the idea of that happening makes me laugh your paronoid man.
Lastly I only will have 1 stock one left has I just bought 5 sets of all motor pistons and will be selling built street b20 all motor bottom ends
06-03-2008, 10:44 PM
#50
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re: b series swap list
Originally Posted by chris
Fine if it doesnt run send it back and you get your money back good enough. But the idea of that happening makes me laugh your paronoid man.
Lastly I only will have 1 stock one left has I just bought 5 sets of all motor pistons and will be selling built street b20 all motor bottom ends
