HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   what to check before replacing oil pump (https://www.homemadeturbo.com/hybrid-tech-8/what-check-before-replacing-oil-pump-52251/)

Scott-EP 12-20-2005 06:14 AM

Re: what to check before replacing oil pump
 
i have gotten pieces of bearing in my cylinder head before so i guess its possible that some worked their way to the piston with the oil and then scratched your cylinder walls up pretty bad.

solfly 12-21-2005 07:04 PM

Re: what to check before replacing oil pump
 
i think its just the pump, no pictures of it but it is scored up pretty badly inside and the tolerances are so small that a feeler gauge twice the max fits

i do not have a knock the car was running for mere seconds before i shut it down

Scott-EP 12-21-2005 09:17 PM

Re: what to check before replacing oil pump
 
im still a little confused at what your problem is. a little bit of history might help, like did you just do a rebuild, or did you just buy this engine. did you wake up one morning and the oil light wouldnt go out? im kinda lost

solfly 12-22-2005 06:07 PM

Re: what to check before replacing oil pump
 
recently bought the engine
started it one morning and the light didnt go out

it was the oil pump all is well now

Scott-EP 12-22-2005 06:10 PM

Re: what to check before replacing oil pump
 
thats good, but seems wierd to me that the oil pump would be the problem

mycrx 12-22-2005 06:15 PM

Re: what to check before replacing oil pump
 
if your oil pump goes out or isnt working efficently id look into getting a new motor, chances are its messed with something else.

solfly 12-22-2005 10:09 PM

Re: what to check before replacing oil pump
 
everythings good, the pump was worn out, the tolerances are very tight
motor is nice and quiet so im not worried
not my daily driver so if it goes it goes

con 12-22-2005 11:53 PM

Re: what to check before replacing oil pump
 

Originally Posted by MADMAX
When the #1 rod bearing spun in my Y8 it started to lose oil rapidly. When I tore it down all of the other bearings were fine and the #1 piston was crusted black while the others were fine. Any ideas.

Don't mean to thread Jack.

so by your accounts the factory piston squirters that honda uses to shoot oil into the bottems of pistons/cylinders will make it burn oil? ::)

0b00st0 12-23-2005 10:28 AM

Re: what to check before replacing oil pump
 

Originally Posted by highroller54
so by your accounts the factory piston squirters that honda uses to shoot oil into the bottems of pistons/cylinders will make it burn oil? ::)

First of all those are pointed at the bottom of the pistons not the cylinder walls. Second, those don't flow enough volume to overload the oil rings on the pistons. The amount of oil being thrown into the cylinders at high rpm is far greater.

Read this http://www.performanceoiltechnology....onsumption.htm

Scott-EP 12-24-2005 08:46 AM

Re: what to check before replacing oil pump
 
i read that and it makes sence, but i still dont see a lot of oil getting burned. but its like my bike. at high rpms it uses a little bit of oil. it only has 10k miles so im sure nothing is worn and there are no leaks at all. what you are saying is true, but i dont think its enough to be noticeable


All times are GMT -5. The time now is 10:01 AM.


© 2024 MH Sub I, LLC dba Internet Brands