which type of oil pans will fit a dohc zc??
#1
which type of oil pans will fit a dohc zc??
mine is bent so while im doing a re-build i plan to replace the oil pan also, so are there any other oil pans that will bolt right up to a dohc zc (like any other d-series pans?)
#3
Re: which type of oil pans will fit a dohc zc??
a1 or a6.
the a1 is deeper and holds 1/2 quart more oil. if you have the stock zc manifold, it most likely will hit. u can use the teg dp section.
D16A1 pan will bolt up - sump may be in conflict with downpipe
D16A6 pan will bolt up - you will need to change oil pump pick-up and it doesn't fit just right - you have to make it fit - here is a write-up on how one guy chose to fix it (personally, i would just make a new tab and locate it where it matched hole in the girdle and weld it on to the tube):
http://www.muller.net/sonny/crx/paninstall/index.html
D16A6 pan will bolt up - you will need to change oil pump pick-up and it doesn't fit just right - you have to make it fit - here is a write-up on how one guy chose to fix it (personally, i would just make a new tab and locate it where it matched hole in the girdle and weld it on to the tube):
http://www.muller.net/sonny/crx/paninstall/index.html
Thread
Thread Starter
Forum
Replies
Last Post
Standbackimapro
Hybrid/Tech
5
08-28-2006 05:14 PM