HomemadeTurbo - DIY Turbo Forum - which type of oil pans will fit a dohc zc??

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - which type of oil pans will fit a dohc zc?? (https://www.homemadeturbo.com/hybrid-tech-8/type-oil-pans-will-fit-dohc-zc-51353/)

which type of oil pans will fit a dohc zc??

mine is bent so while im doing a re-build i plan to replace the oil pan also, so are there any other oil pans that will bolt right up to a dohc zc??? (like any other d-series pans?)

Re: which type of oil pans will fit a dohc zc??

a1 or a6.

Quote:

D16A1 pan will bolt up - sump may be in conflict with downpipe
D16A6 pan will bolt up - you will need to change oil pump pick-up and it doesn't fit just right - you have to make it fit - here is a write-up on how one guy chose to fix it (personally, i would just make a new tab and locate it where it matched hole in the girdle and weld it on to the tube):
http://www.muller.net/sonny/crx/paninstall/index.html

the a1 is deeper and holds 1/2 quart more oil. if you have the stock zc manifold, it most likely will hit. u can use the teg dp section.