Boosted075CRX

i have a 93 jdm d15b. witch is a vx botoom end with z6 head. Its a 1.5 so do i have to use the oil pan from this motor? I have a spare D16a6 pan, and was thinking i can tap this one and themn just drop and put rigth back up.

HMT-Admin

Those 2 pans should be very similar, alot of the D-series oil pans have slight variations in them, but you should be ok.

Boosted075CRX

sweet thanks a lot

shortyz

are d16a6 and d15b2/7 pans the same jeff?

LUDELVR

on that turbo kit I put on, the d15 oil pan was too short for the z6 engine. It was about half an inch too short and I couldn't get it to go flush, so they are in fact a bit differnt. As well, the markings and indents along the pan are completely different. The d15 had little ovals around the oil pan beside the holes while the d16z6 had little circles so I also needed a different gasket.

Boosted075CRX

the motor i have is a 1.5 an di wnat to put a a6 pan on will this work

2000psi

I was just wondering this same thing...I wanted to get a Moroso oil pan for my D16Y7 but their site only says "D16 SOHC" engines....anyone know if the D16Y pans are the same?