Re: turbo d build
Yes, but you will have to grind the small end of the rod (off the sides) so the small end of the rod can fit inside of the piston.
|
Re: turbo d build
how do u rec. i do that. with like a grinder or a drimel
|
Re: turbo d build
what is this little..trick with the bearings?
|
Re: turbo d build
drilling out the oil holes to allow more oil though. not really anything new juss a little trick stop from spinning and such
|
Re: turbo d build
brother before you try drilling out the oil hols in the bearings i thought i'd tell you ACL race bearings have enlarged oilling holes
|
Re: turbo d build
yeah.....you can get the tuner toys rods cheap as ----, you can also get srp forged pistons cheap as ---- for a D, and you also have to notch out the block at the bottom for clearance on the beefier rods, i would let a machine shop do it, some guys do it themselves, im just lazy like that....
|
Re: turbo d build
anyone who goes to endyn's website can figure out how to bore and mach oiling holes ::) just make sure you have no sharp edges or burrs... and dude..get forged pistons..i'm gonna run a conservative 25psi on my built d...i can't wait
|
Re: turbo d build
well im glad to see that ur going to be conservative ;D.
|
Re: turbo d build
you could just buy my built Y8 :D save yourself the time & a little money. Eagle rods/srp pistons/ported A6 head. $1600 + shipping, PM me if your interested.
|
All times are GMT -5. The time now is 07:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands