turbo d build
 

im building my already turbo d. im going to use eagle h beams, nippons (non forged) pistons, arp studs, king main/rod bearings (with a little trick), greddy 19t turbo, dsm 450cc injectors, and im looking at running around 12 to 15 psi.

i want to no if i need to change anything as far as the turbo comp.
and do i NEED to upgrade the water/oil pump.

Re: turbo d build
 

If you are going through the trouble why not use forged pistons?

Re: turbo d build
 

Re: turbo d build
 

depends on the condition of the water and oil pump..
check the oil pump clearances.
I would boost at least 20 psi though if you're going forged rods.

Re: turbo d build
 

Re: turbo d build
 

u cant use nippons with eagles

Re: turbo d build
 

word, floating wrist pins in forged rods, no dice.

Re: turbo d build
 

ive never heard that before. y cant i use them. can i use vitara. there non forged but a guy that uses them with forged rods and hes in the 12's.

dont want to go with forged pistons cause i'll never see that kinda power out of my car. i juss got the rods cause it was a good deal

Re: turbo d build
 

Nippons = pressed pin
Vitara's = floating pin

Yes you can use vitara's on your H-beams.

FYI...TunerToys sells D series H beams cheap.

Re: turbo d build
 

will they work with my vitara pistons, the tuner toys rods

Re: turbo d build
 

Yes, but you will have to grind the small end of the rod (off the sides) so the small end of the rod can fit inside of the piston.

Re: turbo d build
 

how do u rec. i do that. with like a grinder or a drimel

Re: turbo d build
 

what is this little..trick with the bearings?

Re: turbo d build
 

drilling out the oil holes to allow more oil though. not really anything new juss a little trick stop from spinning and such

Re: turbo d build
 

brother before you try drilling out the oil hols in the bearings i thought i'd tell you ACL race bearings have enlarged oilling holes

Re: turbo d build
 

yeah.....you can get the tuner toys rods cheap as ----, you can also get srp forged pistons cheap as ---- for a D, and you also have to notch out the block at the bottom for clearance on the beefier rods, i would let a machine shop do it, some guys do it themselves, im just lazy like that....

Re: turbo d build
 

anyone who goes to endyn's website can figure out how to bore and mach oiling holes ::) just make sure you have no sharp edges or burrs... and dude..get forged pistons..i'm gonna run a conservative 25psi on my built d...i can't wait

Re: turbo d build
 

well im glad to see that ur going to be conservative ;D.

Re: turbo d build
 

you could just buy my built Y8 :D save yourself the time & a little money. Eagle rods/srp pistons/ported A6 head. $1600 + shipping, PM me if your interested.