superd

im building my already turbo d. im going to use eagle h beams, nippons (non forged) pistons, arp studs, king main/rod bearings (with a little trick), greddy 19t turbo, dsm 450cc injectors, and im looking at running around 12 to 15 psi.

i want to no if i need to change anything as far as the turbo comp.
and do i NEED to upgrade the water/oil pump.

SpankedYA!

If you are going through the trouble why not use forged pistons?

tranceminister

Semnos

depends on the condition of the water and oil pump..
check the oil pump clearances.
I would boost at least 20 psi though if you're going forged rods.

boostncivic

Ravage70

u cant use nippons with eagles

FooK

word, floating wrist pins in forged rods, no dice.

superd

ive never heard that before. y cant i use them. can i use vitara. there non forged but a guy that uses them with forged rods and hes in the 12's.

dont want to go with forged pistons cause i'll never see that kinda power out of my car. i juss got the rods cause it was a good deal

Mindless

Nippons = pressed pin
Vitara's = floating pin

Yes you can use vitara's on your H-beams.

FYI...TunerToys sells D series H beams cheap.

superd

will they work with my vitara pistons, the tuner toys rods