turbo d build
 

im building my already turbo d. im going to use eagle h beams, nippons (non forged) pistons, arp studs, king main/rod bearings (with a little trick), greddy 19t turbo, dsm 450cc injectors, and im looking at running around 12 to 15 psi.

i want to no if i need to change anything as far as the turbo comp.
and do i NEED to upgrade the water/oil pump.

Re: turbo d build
 

If you are going through the trouble why not use forged pistons?

Re: turbo d build
 

Re: turbo d build
 

depends on the condition of the water and oil pump..
check the oil pump clearances.
I would boost at least 20 psi though if you're going forged rods.

Re: turbo d build
 

Re: turbo d build
 

u cant use nippons with eagles

Re: turbo d build
 

word, floating wrist pins in forged rods, no dice.

Re: turbo d build
 

ive never heard that before. y cant i use them. can i use vitara. there non forged but a guy that uses them with forged rods and hes in the 12's.

dont want to go with forged pistons cause i'll never see that kinda power out of my car. i juss got the rods cause it was a good deal

Re: turbo d build
 

Nippons = pressed pin
Vitara's = floating pin

Yes you can use vitara's on your H-beams.

FYI...TunerToys sells D series H beams cheap.

Re: turbo d build
 

will they work with my vitara pistons, the tuner toys rods