Toyota st162 to obd1 honda management.
This is the idea to adapt the Honda distributor to the Toyota s series head.
http://img381.imageshack.us/img381/4...adaptorpi6.jpg I need this machined. More to come. Expect this thread to be a form of failure, ok? http://img133.imageshack.us/img133/6...ardnessdx5.jpg I need help with this. I have most of it figured out but I need to know what things are what on the honda ecu and possibly score the voltage outputs for the sensors. This thread continues to be a form of failure, ok? |
Re: Toyota st162 to obd1 honda management.
Jd, hold my hand. I'm scared, ok?
|
Re: Toyota st162 to obd1 honda management.
i'll machine that dist spacer for you, crackhead cheap because im a cnc guy.....
you need to draw it properly and email me. cheers Dan. |
Re: Toyota st162 to obd1 honda management.
awesome, thanks. I still need to figure out what angle the hole for the pin needs drilled and how much of an offset/what angle the prongs that go into the dist need to be at.
I'll have to tdc the engine, check orientation and mark some stuff when I get time. more work on jumper harness. http://img147.imageshack.us/img147/2...ardnessha9.jpg The distributor, map sensor and a few other things still need sorted out. I'm probably going to have to run a subharness for the map, ks and distributor |
Re: Toyota st162 to obd1 honda management.
vtec on your toyota will be awesome. you should use it
|
Re: Toyota st162 to obd1 honda management.
Originally Posted by c0mpl3x
vtec on your toyota will be awesome. you should use it
|
Re: Toyota st162 to obd1 honda management.
Originally Posted by rawr
I am going to try to use it to trigger the nog setting on my mbc
|
Re: Toyota st162 to obd1 honda management.
Originally Posted by rawr
I am going to try to use it to fire the flux capacitor
|
Re: Toyota st162 to obd1 honda management.
Originally Posted by rawr
I am going to try to use it to fire the flux capacitor
|
Re: Toyota st162 to obd1 honda management.
There was a couple good write ups on pgmfi.org i think it was.Did you find those?Looks like a great way to get cheap quality management for the Toy crowd and i think if a guy was smart he would machine a dozen adapters and make some jumper harnesses to sell.
|
All times are GMT -5. The time now is 11:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands