Toyota st162 to obd1 honda management.
 

This is the idea to adapt the Honda distributor to the Toyota s series head.

http://img381.imageshack.us/img381/4...adaptorpi6.jpg

I need this machined.

More to come.


Expect this thread to be a form of failure, ok?

http://img133.imageshack.us/img133/6...ardnessdx5.jpg

I need help with this. I have most of it figured out but I need to know what things are what on the honda ecu and possibly score the voltage outputs for the sensors.

This thread continues to be a form of failure, ok?

Re: Toyota st162 to obd1 honda management.
 

Jd, hold my hand. I'm scared, ok?

Re: Toyota st162 to obd1 honda management.
 

i'll machine that dist spacer for you, crackhead cheap because im a cnc guy.....

you need to draw it properly and email me.

cheers Dan.

Re: Toyota st162 to obd1 honda management.
 

awesome, thanks. I still need to figure out what angle the hole for the pin needs drilled and how much of an offset/what angle the prongs that go into the dist need to be at.

I'll have to tdc the engine, check orientation and mark some stuff when I get time.

more work on jumper harness.

http://img147.imageshack.us/img147/2...ardnessha9.jpg


The distributor, map sensor and a few other things still need sorted out.


I'm probably going to have to run a subharness for the map, ks and distributor

Re: Toyota st162 to obd1 honda management.
 

vtec on your toyota will be awesome. you should use it

Re: Toyota st162 to obd1 honda management.
 

I am going to try to use it to trigger t-vis.

Re: Toyota st162 to obd1 honda management.
 

Re: Toyota st162 to obd1 honda management.
 

Re: Toyota st162 to obd1 honda management.
 

:6 :6 :6 :6 :6

Re: Toyota st162 to obd1 honda management.
 

There was a couple good write ups on pgmfi.org i think it was.Did you find those?Looks like a great way to get cheap quality management for the Toy crowd and i think if a guy was smart he would machine a dozen adapters and make some jumper harnesses to sell.

Re: Toyota st162 to obd1 honda management.
 

I've never seen any of those on pgmfi. Do you have a link?


I was thinking about getting a few of these machined. Especially since 1" round stock comes in 2 foot sections only. The jumper harnesses would need to be like 180-200 for it to be worth the time. I have like 90 dollars into mine in costs only so far.

Re: Toyota st162 to obd1 honda management.
 

Does it spin the right way? If not, can you fix it?

Re: Toyota st162 to obd1 honda management.
 

everything spins the right way, firing order is the same usw

Re: Toyota st162 to obd1 honda management.
 

Half finished the harness tonight. Let's hope it's not a piece of ----.

Re: Toyota st162 to obd1 honda management.
 

Done yet? Im going to steal your design and use JD's lathe to make my own. Might use it on the new ride. :6

Re: Toyota st162 to obd1 honda management.
 

What motor is this ------ engineering come from. corolla? At work and too lazy to look up. kb usage not worth it. at the moment.

Re: Toyota st162 to obd1 honda management.
 

celica S series engine. Which means it will also work on any 2nd gen MR2 and very carefully Aseries engine. Which is relevant to my interests.

Re: Toyota st162 to obd1 honda management.
 

If you get to making one before I do, I'll pay you to turn it for me :P I'll even send the metal to make it out of down there.


I had a birthday Wednesday and a barrage of tests all week. I'm going to head down to the electronics surplus place today after school and see if I can pick up some some bundled wire to run the distributor and map wires to the engine bay.

Re: Toyota st162 to obd1 honda management.
 

http://img444.imageshack.us/img444/963/image0061so4.jpg
http://img443.imageshack.us/img443/6...age0071fa0.jpg

Custom machined on an angle grinder and finished in a spec within .00000000001th of an inch with a hand file.

Re: Toyota st162 to obd1 honda management.
 

nice nog, so which 3sge/gte is it?

Re: Toyota st162 to obd1 honda management.
 

first gen jap 3sge.

Re: Toyota st162 to obd1 honda management.
 

Yar. :6

Re: Toyota st162 to obd1 honda management.
 

Saved to favorites list for easy to get to updates :6

Re: Toyota st162 to obd1 honda management.
 

very interested in this 4ag swap and obd1 honda swap in a paseo in near future.
Keep the updates coming.

Re: Toyota st162 to obd1 honda management.
 

solid

Re: Toyota st162 to obd1 honda management.
 

These guys put a honda ecu running ectune on a mitsu and said they spun the dizzy the wrong way with no changes.
http://forum.ectune.com/viewtopic.php?t=1493

Is that adaptor aluminum? The key on the stock dizzy is probably much harder than regular steel let alone what looks to be aluminum. If you browse through mcmaster they sell steel that can be hardened, as well as some that is already hardened to different degrees. I forget what one is the hardest you can get yet still machine, I'll have to look it up I just used some cause I didn't have the time to send it out to get heat treated after machining.

And if you don't have access to any cad, get me some dimensions and I'll model it for you.

Kick ass project btw

Re: Toyota st162 to obd1 honda management.
 

http://forum.pgmfi.org/viewtopic.php...cu+in+a+toyota

Sseries is easy to work with the honda dizzy, it the 16v 4A-GE sidemount dizzy im concerned about. Isnt going to be quite as simple...

Re: Toyota st162 to obd1 honda management.
 

in for the updates on this. i have always thought about it but never really had another car to try it on

Re: Toyota st162 to obd1 honda management.
 

It's aluminum, but all the other guys that have done this have used aluminum and the way I'm making mine looks stronger than their's since I'm not boring a hole all the way through the adapter or running 1/2" ID tube like this guy.

Attachment 13455

Re: Toyota st162 to obd1 honda management.
 

damn man. cool ---- right there.
home made FTMFW

Re: Toyota st162 to obd1 honda management.
 

In for updates, have you got it to work yet?

Re: Toyota st162 to obd1 honda management.
 

I'm still buying parts. I'm picking up an ecu from blundar, I need a map sensor, chip burner and a wide band. I hope thats it.

Re: Toyota st162 to obd1 honda management.
 

http://img156.imageshack.us/img156/2618/image025lf8.jpg

oh noez !!!!!!!!!!!1111!1!

Re: Toyota st162 to obd1 honda management.
 

This thread is a form of failure.

Re: Toyota st162 to obd1 honda management.
 

thanks for making it that way :(

Re: Toyota st162 to obd1 honda management.
 

This thread came with for warnings of failure. It was only a matter of time.

Re: Toyota st162 to obd1 honda management.
 

we need pictures of your tranny gears embedded into your pavement and rods through the block pronto

Re: Toyota st162 to obd1 honda management.
 

No updates in awhile so here's a cellphone pic dump.

http://img387.imageshack.us/img387/6246/image011lu8.jpg

Bored at a Christmas party.

http://img71.imageshack.us/img71/286/image012sh9.jpg

JD's frat

http://img118.imageshack.us/img118/9275/image041pw0.jpg
http://img357.imageshack.us/img357/340/image042fu0.jpg

Project ---- amassing.

http://img224.imageshack.us/img224/1744/image021vt5.jpg

OC for TLOG

http://img387.imageshack.us/img387/1670/image034fk3.jpg

This fagot was asking for it, so I hit his Z on the way out.

Re: Toyota st162 to obd1 honda management.
 

i wouldve taken the nuts of his wipers and reinstalled the caps, then hit the car

Re: Toyota st162 to obd1 honda management.
 

Dang Caleb alot of aggression as of late. How are you pinning in the wires to the ECU? Doesnt look to be the same connectors and the gauge of your wiring is massive. You look into OHM's law yet on the amount of drop your going to have? Dave re wired my harness for me at my last tune. Tried to teach my bitchass how to remove the pins but I continued to ride the FAILBOAT so he took over and I reinstalled them. We tag teams that bitch. And watched Bone wonder around talking about D trans to people who had no idea who he was. Funny ----.