mike94se

Look at 88-91 civic mufflers








------

b16sellout

Magnaflow 2.5" In and Out center center mufflers 40 bucks at your friendly local auto store, do it ------. and learn to weld while you're doing it cause it is a great skill to have

IndianRide

if you don't have the spring bolts or a flex pipe you'll crack your manifold, just a little fyi

Loserkidwac

They make EF exhaust that come out on the wrong side i hate them too because they look stupid...I'd suggest saving up and getting a Thermal R&D, I believe it is the best exhaust made for the CRX, I think mine is awesome and it sounds great too, almost stock sounding at idle and lower rpms...but when you romp on it WOT and higher rpms it opens up and sounds great...

Also napa sells spring bolts for exhausts...

kuroko

That was very helpful, thanks.

What do you guys think of the double axle exhausts? I like the look of them but unsure of their functionality.

b16sellout

Duals on a CRX is retarded, another alternative to flex pipes or spring bolts is solid motor mounts. I broke the welds on my ebay header without a flex pipe

kuroko

Gotcha, though I may use them anyway if my friend gives me the one he has. This is what I need to attach the pipe/muffler right?

http://www.napaonline.com/masterpage...g%20Bolt%20Kit

Plus this:

http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWN%3AIT

And of course some hangers and or welding...

b16sellout

That should do it, there is a hanger over the control arm. I don't know if it is connected to your 2.25" piping that is already there or if you will need to add one to either it or the piping directly off the muffler.

kuroko

Thanks for the help and sorry for being such an annoying noob.

d16u7nh

i have a autotechnic or what ever its called big bad fart can for a crx. if you want it let me know and i have the silencer for it.