Stupid CRX Exhaust Question
OKay, as per my standard noob ways I have another dumb question:
I have a 1990 CRX Si with a 2.25" exhuast pipe, I also a 2.25 inch tanabe muffler. I want to connect them and mount the muffler (pipe is already on). I do not however have the hardware or springs or whatever and no auto store I have called here does either. Any suggestions on what to get? Thanks! |
Re: Stupid CRX Exhaust Question
(this should go in tech)
where does your exhaust piping end? does the muffler have a 2-bolt flange or just the 2.5" opening? pics would really be helpful. |
Re: Stupid CRX Exhaust Question
It ends near the back wheel well, it has the two bolt flange and the opening. I can post pics tomorrow morning. Thanks.
|
Re: Stupid CRX Exhaust Question
Get two bolts, and two nuts, and a gasket. use a wrench and tighten it...
|
Re: Stupid CRX Exhaust Question
is that tanabe an axle back from the same type of car? if it is, it should bolt straight up, and connect the exhuast hangers to the rubber mounts under there....if its not, then you will have to start wlding or buy some exhaust strap and use that with some bolts to the bottom of your trunk or bumper
|
Re: Stupid CRX Exhaust Question
That exhaust will fit like ---- on a crx, just a fyi
|
Re: Stupid CRX Exhaust Question
Originally Posted by AbaZ
That exhaust will fit like ---- on a crx, just a fyi
|
Re: Stupid CRX Exhaust Question
that exhaust was designed for a 92+ civic/integra style. The crx needs a huge fart cannon chamber that sits horizontal under the trunk, and the tip exits on the left side (since thats where the cutout on the bumper is it)
|
Re: Stupid CRX Exhaust Question
The down pipe on my crx comes to the right side of the bumper, so I guess that means I just need to get an oem muffler until I can afford a better catback upgrade or something...?
|
All times are GMT -5. The time now is 08:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands