i have a oil press gauge and the stock sensor is not connected or installed, realized the other day my oil press light on my cluster goes off still when the car starts, whats up with that

 

it did that on my odb-0 b16. i didnt have a wire going to the oil pressure sensor or the 02 yet it threw no code

 

I used a couple T's screwed together to get two 1/8th NPT ports on my oil line, one for my oil pressure guage (mechanical) and one for the oil pressure sensor. The T's are remote mounted. I have a BSP fitting with a hose barb on the block so it doesn't snap off. Hope the summit twist tite hose and barbs works good.

Guage Sensor
| |
BSP/Barb------------Barb/Tee-Tee/Restrictor/Barb----turbo

That's how I'm plumbing it

 

It won't turn on the light unless you ground the wire...which the sensor does when it sees no oil pressure. And there are no ecu codes for low engine oil pressure, only the oil pressure sender next to the spool valves on vtec heads.

 

lol I just looked at my post. That's confusing as hell. haha