Rebuilt my engine but have a problem!
#1
Rebuilt my engine but have a problem!
I took my engine completly apart and re lubed everything and made sure every thing was right. i put the whole thing back together and try to hand trun the crank. the crank only turned about 180 degress and wouldnt budge. what am i doing wrong? am i useing the right bearings are they to tight. i have toda 0.25 bearings. the crank has been polished, shaved for weight, balanced. what gives what am i missing?
#6
Re:Rebuilt my engine but have a problem!
Originally Posted by d16y7nh
my timing belt is not hooked up yet im still working on the bottom end.
then it`s prob.ly one of the valves are opened and hitting the piston.
set the timing put the belt back then try again.
oh and whay are u usign .25 bearings? did you have it measured correctly?
#10
Re:Rebuilt my engine but have a problem!
you guys wont belive what a dumb ---- i am sometimes. the reason my ------- crank wasnt going a full turn was me being the bright dip ---- that i am i put socks in my two middle cyliders so nothing would get into them while i was working on the engine. GUESS WHAT I FORGOT TO DO! anyway i guess if doctors can leave towels in people, i can leave a sock in my engine. thanks god i took it apart and looked at it before i fired it. what a dumb ----!