Rebuilt my engine but have a problem!
 

I took my engine completly apart and re lubed everything and made sure every thing was right. i put the whole thing back together and try to hand trun the crank. the crank only turned about 180 degress and wouldnt budge. what am i doing wrong? am i useing the right bearings are they to tight. i have toda 0.25 bearings. the crank has been polished, shaved for weight, balanced. what gives what am i missing?

Re:Rebuilt my engine but have a problem!
 

check valve timing. :)

you rebuilt it, or just tore it apart and put it back together?

Re:Rebuilt my engine but have a problem!
 

my timing belt is not hooked up yet im still working on the bottom end.

Re:Rebuilt my engine but have a problem!
 

did u make sure the bearings are in the EXACT same spot?

Re:Rebuilt my engine but have a problem!
 

u got the spark plugs out?

The thing should naturally be a bitch to work with when it's fresh.. can you reverse it instead?

Re:Rebuilt my engine but have a problem!
 

is your cam on?...
then it`s prob.ly one of the valves are opened and hitting the piston.
set the timing put the belt back then try again.
oh and whay are u usign .25 bearings? did you have it measured correctly? :-X

Re:Rebuilt my engine but have a problem!
 

The bearings being .25 over should be checked for clearances. I hate all that bullshit, but it sounds like your unsure of what's really going on with the bearings.

New rings? Anything?

Re:Rebuilt my engine but have a problem!
 

Plastigauge is your friend, and you can have the head on, but make sure the cams are out if you are spinning it over, and having the plugs out also helps ;)

Re:Rebuilt my engine but have a problem!
 

ya, i could crank mine over with a 1/2 drive socket wrench when it was fully together. when its fresh (without oil ALL OVER) it can be hard.

Re:Rebuilt my engine but have a problem!
 

you guys wont belive what a dumb ---- i am sometimes. the reason my ------- crank wasnt going a full turn was me being the bright dip ---- that i am i put socks in my two middle cyliders so nothing would get into them while i was working on the engine. GUESS WHAT I FORGOT TO DO! anyway i guess if doctors can leave towels in people, i can leave a sock in my engine. thanks god i took it apart and looked at it before i fired it. what a dumb ----!