bumblezc

Are 90-93 Teg LCA longer the 90 Civic Hatches?

I'm trying to solve a tire rub problem before my alignment on friday. I'm not to low but 36mm Offesty with Falken Azenis 205/50/15 tire stick out about 1/2" from my fender with near 0deg camber (Eyeballed).

88crxSi

yes.. the upper and lower control arms on the tegs are 1/16" longer.

bumblezc

Cool, I don't think an extra 1/16 of an inch is gonna buy too much,

I also quetsioned that because my buddy and I grabed the one from his car, 94 Civic Coupe, and my 90 integra on, Both have New never used ES Bushing in them and the bolt hole lined up perfectly.

Someone one on HT said that 90 and 94 civic one are exactly the same also.

I don;t know, not like 1/16 is gonna pull the wheels in that much.

88crxSi

88-91 civics are 1/16" SHORTER than 92+ civics and 90+ tegs.

whiterice

have you tried a 40 offset on your car? or other tires? i know the azenis are wider than other 205/50/15 i have had. those tires with 0 camber on an ef is tough.
good luck.

bumblezc

Ya, new 40-45 mm offset would be ideal, and ya azenis are MEATY tire. There is NO way I'm getting rid of those. I might keep the car up a little higher then usual to avoid rub. My rims (15" ASA 5 spokes) cost me 50.00 CAN so thats like 40 USD> I just painted them and I get alot of compliements on them, so it's hard for me to go out and buy another set, especially when It's even hard to find OEM rims for 400 or less!

88crxSi

machine a few mm off the wheel hub surface?