Ok i need to know what timing belt 2 use with the A6 block.Y8 head combo
3.0 BAR
Joined: Sep 2005
Posts: 1,995
Re: Ok i need to know what timing belt 2 use with the A6 block.Y8 head combo
Originally Posted by Darkelvis
No, they aren't the same. If you are using the Y8 head you have to use the Y8 timing belt. Always use the timing belt that corresponds with the head. 
nicely said
1.0 BAR
Joined: Apr 2003
Posts: 325
Re: Ok i need to know what timing belt 2 use with the A6 block.Y8 head combo
everyone who says same head bolts as the head.....have you ever done this swap? i've done it 2 times and from my experience i used the a6 head bolts for all except for the back left (right in front of the vtec solenoid) i used the y8 head bolt, with success. the y8 bolts had half the thread that the a6 bolts. as for the timing belt i used the z6, it was kind of tricky to get on but it worked.
3.0 BAR
Joined: Nov 2004
Posts: 1,608
Re: Ok i need to know what timing belt 2 use with the A6 block.Y8 head combo
Yes, I have done the swap, hell, I'm the guy that did the writeup for it for HMT. I don't know about the bolts because I just used ARP's, but if you are using the Z6 head, use the Z6 belt, if you are using the Y8 head, use the Y8 belt, they are different.
1.0 BAR
Joined: Feb 2004
Posts: 257
Re: Ok i need to know what timing belt 2 use with the A6 block.Y8 head combo
Originally Posted by Darkelvis
No, they aren't the same. If you are using the Y8 head you have to use the Y8 timing belt. Always use the timing belt that corresponds with the head.
1.5 BAR
Joined: Nov 2004
Posts: 820
Re: what headblots to use with a ZC sohc Bottom and a Y8 head??? need some help
Originally Posted by Ravage70
Originally Posted by boosted_b16
y8 head on zc block is like 13:1 c/r isnt it? thats ------ sweeeet! you should boost it..... :P
Thread
Thread Starter
Forum
Replies
Last Post
shadetree
Hybrid/Tech
2
Jun 25, 2008 01:06 AM
Erollinab
Hybrid/Tech
3
Jun 22, 2007 01:20 AM
hoggy
Hybrid/Tech
2
Jun 2, 2005 12:36 PM
