Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

Ok guys....its runs but there is still a problem...last question i promise

Thread Tools
 
Search this Thread
 
Old 02-05-2003, 05:52 PM
  #2  
3.0 BAR
 
shortyz's Avatar
 
Join Date: Dec 2002
Posts: 3,396
Default Re:Ok guys....its runs but there is still a problem...last question i promise

whats clicking? is it just the key clicking and not turning the motor over?

bring power to the starter and the starter solenoid and see if it starts up.. sounds like a bad connection..
shortyz is offline  
Old 02-06-2003, 01:27 AM
  #5  
3.0 BAR
 
OnYx's Avatar
 
Join Date: Nov 2004
Posts: 5,101
Default Re:Ok guys....its runs but there is still a problem...last question i promise

According to an OBD 1 manual (yes I realize its properly a OBD 0 computer) the 3 is the MAP sensor and the 14 is the IACV.
OnYx is offline  
Old 02-06-2003, 05:25 AM
  #6  
1.0 BAR
 
ProzacOverdose's Avatar
 
Join Date: Jan 2003
Posts: 624
Default Re:Ok guys....its runs but there is still a problem...last question i promise

just a thought...and you might wanna try cause you've tried the switching of iacv already, but the intake air temp(IAT) plug is exactly the same as the iacv, and its on the back where the iacv is too. BUT...keep in mind, even if you dont plug anything into the IAT, it wont give you a check light, so knowing this, you might just wanna try switching the 2 cause if you did mix it up. you wont get the cl for the iat, only the iacv. just my $0.02. hey it happens, I did it before good luck
ProzacOverdose is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wank.a.lot
Forced Induction
28
10-29-2008 07:20 PM
jeanious
Forced Induction
8
07-19-2006 07:21 PM
racinskittle
Forced Induction
13
09-29-2003 12:30 PM
one800bobby
Hybrid/Tech
1
12-23-2002 07:36 AM



Quick Reply: Ok guys....its runs but there is still a problem...last question i promise



All times are GMT -5. The time now is 07:09 PM.