cantgetright420

wanting to do a cheap turbo setup on my ZC motor. i was wondering what would be a good engine management? or could i just chip my ecu..


i dont want it to blow up on me.

txdohczc

wrong section but you need a pm6 to chip. if you are running a pg7 it wont work. if you have a pm6 send it to xenocron for a basemap. if you have a pg7 then buy a chipped pm6 from xenocron

zccr-xsi

ok

IMO convert your zc to obd1 and use crome.
crome pro 150$

ectune 200$ <<<that a bad *** rom editor i would suggest that to anyone and everyone.

cantgetright420

alright. thanx man, so i would need a jumper harness to run a obd1 soo then after that what would i do to get chrome?? do i download it or order it? ive been trying to read up on it but alot of it is kinda confusing.

zccr-xsi

yes u will need a jumper harness but u can find them on ebay for real cheap,ull also need a obd1 zc dizzy u can make the dizzy harness that not hard at all but incase u cant u can buy them also.u can download crome for free from this link.


http://www.tunewithcrome.com/download/crome1.5.zip

and here for your jumper harness needs!!

http://www.-------------/catalog/obd-harness-c-29.html

quadtech

chipped PR4 or PM7 with turbo edit and ur ready to roll. if ur keeping around 10-12 psi, injector selection and control through turboedit is no problem and setup is a breeze.