hey jeff!..hows your LS/v-tec?
03-29-2003, 06:10 PM
#21
3.0 BAR
Join Date: Dec 2002
Posts: 3,828
Re:hey jeff!..hows your LS/v-tec?
I would just boost the hack out of the B16 and rebuild the B18 in case the B16 blows up hehehehe
03-30-2003, 12:37 PM
#22
0.0 BAR
Join Date: Mar 2003
Posts: 14
Re:hey jeff!..hows your LS/v-tec?
AbaZ they have complete heads at mmrusa.com, but they are very expensive, I have 700 to spend and dont want to get ripped off or jipped. please help if can, THANKS
03-30-2003, 03:30 PM
#23
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:hey jeff!..hows your LS/v-tec?
700? I would keep my eyes open before I jumped on that.. you can get a entire OBD0 B16a longblock for around 500 bucks?
http://www.hmotorsonline.com/shop/sc...Engines&hit=15
Jeff
http://www.hmotorsonline.com/shop/sc...Engines&hit=15
Jeff
03-31-2003, 12:42 AM
#24
0.0 BAR
Join Date: Mar 2003
Posts: 14
Re:hey jeff!..hows your LS/v-tec?
what is 0BD0, as in the b16a head you pointed out? Will this head bolt to my 94 b18b block with minimal problems or do I need more ----, than already listed in tech section, like new ecu?? If this engine is straight then I am going to order it monday and use only the pieces I need. PLEASE REPLY WIT THE QUICKNESS IF YOU CAN, THANKS YOU THE ----
03-31-2003, 03:35 AM
#25
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:hey jeff!..hows your LS/v-tec?
The head will work, but you will run into the same stuff I did <mentioned in the tech section>
use your obd1 injectors on the b16a obd0 intake manifold
use a external map sensor 88-91 crx si, or the stock one you have can work, but it just looks gay.
ECU, in order to make it work correctly, I would use a obd1 p72 gsr ecu with your lsvtec.
jeff
use your obd1 injectors on the b16a obd0 intake manifold
use a external map sensor 88-91 crx si, or the stock one you have can work, but it just looks gay.
ECU, in order to make it work correctly, I would use a obd1 p72 gsr ecu with your lsvtec.
jeff
03-31-2003, 09:46 AM
#26
0.0 BAR
Join Date: Mar 2003
Posts: 14
Re:hey jeff!..hows your LS/v-tec?
Im going to order the motor today, but what about the ecu. Should I buy a different one or does mine need to be reprogrammed or some ----?
03-31-2003, 03:27 PM
#27
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:hey jeff!..hows your LS/v-tec?
hmm, read what I posted...
p72 obd1 gsr ecu..
so that would mean, yes you need a different ecu.
You could go half *** and run a msd activated switch w/ some type of fuel controller.
Jeff
p72 obd1 gsr ecu..
so that would mean, yes you need a different ecu.
You could go half *** and run a msd activated switch w/ some type of fuel controller.
Jeff
03-31-2003, 04:17 PM
#28
0.0 BAR
Join Date: Mar 2003
Posts: 14
Re:hey jeff!..hows your LS/v-tec?
my bad, i must have been high or something
Thread
Thread Starter
Forum
Replies
Last Post
turborex89
Turbo Parts For Sale
28
05-15-2008 05:09 PM
