HEAD GASKET JOB GONE WRONG!!!! PLEASE HELP ME!!!!!!
#31
Re:HEAD GASKET JOB GONE WRONG!!!! PLEASE HELP ME!!!!!!
Those tools...you'll use them again.
Maybe you do have blown rings in cilinder 4.
Did you check the valva clearance...you took the head of so you must check the valve clearance and set it right.
Maybe the head needs to be milled though.
Maybe you do have blown rings in cilinder 4.
Did you check the valva clearance...you took the head of so you must check the valve clearance and set it right.
Maybe the head needs to be milled though.
#32
Re:HEAD GASKET JOB GONE WRONG!!!! PLEASE HELP ME!!!!!!
well i am taking the head back off .... when i did the water test on the #4 chamber while the head was off, i did get some leakage out the exhaust valve ...
im water tesing a dx head right now that came off the original motor that was in the way .... im going to pull the head back off and check the head and the deack with a straight edge and see if i got warpage on my hands.....
and i guess ill take it from there ....
im water tesing a dx head right now that came off the original motor that was in the way .... im going to pull the head back off and check the head and the deack with a straight edge and see if i got warpage on my hands.....
and i guess ill take it from there ....
#36
Guest
Posts: n/a
Re:HEAD GASKET JOB GONE WRONG!!!! PLEASE HELP ME!!!!!!
Sounds to me liek your doing alot more work then you need to, a new head is not going to fix your problem.. i would just fix the injector ---- and run it for a little bit and see if your leaks stop...
Thread
Thread Starter
Forum
Replies
Last Post
SQ is the SQUAD
Turbo Parts For Sale
0
01-12-2009 08:45 AM
ProzacOverdose
Turbo Parts For Sale
40
05-02-2008 05:37 PM