have a question about the oil pressure senser
#1
have a question about the oil pressure senser
i was throwing in some gauges today i ran into a problem, i was wondering if i took out the stock oil pressure senser and used that port for my oil pressure sending unit , would that cause any problems or will that work just fine let me know thanks.
#4
Re: have a question about the oil pressure senser
Originally Posted by Mista Bone
If your using a electric sender, mount it to the firewall.
btw.. the only problem you will encounter with disconnecting the stock oil sensor is you will have an oil light on the dash at all times. you could just pull the bulb out tho.
#5
Guest
Posts: n/a
Re: have a question about the oil pressure senser
Originally Posted by crx88Si
Originally Posted by Mista Bone
If your using a electric sender, mount it to the firewall.
btw.. the only problem you will encounter with disconnecting the stock oil sensor is you will have an oil light on the dash at all times. you could just pull the bulb out tho.
#6
Re: have a question about the oil pressure senser
Originally Posted by crx88Si
Originally Posted by Mista Bone
If your using a electric sender, mount it to the firewall.
btw.. the only problem you will encounter with disconnecting the stock oil sensor is you will have an oil light on the dash at all times. you could just pull the bulb out tho.
#8
Re: have a question about the oil pressure senser
Originally Posted by Mista Bone
Originally Posted by crx88Si
Originally Posted by Mista Bone
If your using a electric sender, mount it to the firewall.
btw.. the only problem you will encounter with disconnecting the stock oil sensor is you will have an oil light on the dash at all times. you could just pull the bulb out tho.
Thread
Thread Starter
Forum
Replies
Last Post