HomemadeTurbo - DIY Turbo Forum - Filling Block... How To.... UPDATED

Page 25 of 35

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)

- - Filling Block... How To.... UPDATED (https://www.homemadeturbo.com/hybrid-tech-8/filling-block-how-updated-35544/)

Guy-Fast

07-05-2006 11:04 PM

Re: Filling Block... How To.... UPDATED

Quote:

Originally Posted by daubleaaron

I took my head off the other day and some of the thin spots where I drilled the coolent passages were breaking up. It doesnt look like large chunks are gone or anything but I was hoping for it to look better than it did. Ive got a couple oil changes on it at 15psi. I wouldnt do it again, if I felt I was going to need cylinder support I would weld in a block guard or sleeve the block.

welded in blockguard kids was done back in the old school days and it supported a 500 whp b16 on 35 psi. it works

crx304

07-17-2006 01:13 PM

Re: Filling Block... How To.... UPDATED

Block filling is Ghey! :y

1slow91

10-06-2006 11:17 PM

Re: Filling Block... How To.... UPDATED

anymore updates on the block filling pros/cons with this stuff

Tom-Guy

10-07-2006 09:11 AM

Re: Filling Block... How To.... UPDATED

Some of the people with filled blocks are real pros, and some (like hotrex) are real cons.

Zeniceguycrx

10-07-2006 03:20 PM

Re: Filling Block... How To.... UPDATED

I filled my block with the locktite liquid aluminum and it cam out great, you dont even have to bake it.
it looks awsome

Boostd DAteg

11-08-2006 08:12 PM

Re: Filling Block... How To.... UPDATED

anyone tried this with a b-series block? sorry if someone posted in here, i didn't read the whole thing. i'm very interested in this whole concept and kinda thinkin about doin it with my ls/vtec i'm going to be building. seems like a good project but i'm not sure how it would turn out...any hints or tricks? yay's or nays? any help is appreciated!

reactone

12-01-2006 01:30 PM

Re: Filling Block... How To.... UPDATED

Quote:

Originally Posted by Boostd DAteg

I don't know if you still care, but I have a filled LS/Vtec and its working out fine. As far as hints go, just make sure that you don't fill the block too deep as to cover the water pump area. Also, I used sugar instead of salt,like some of the other guys did. and also, don't fill it up to the very top, you should leave a little bit from the top. And It would be helpful to read the entire post, and ignore Hotrex's results.

Boostd DAteg

12-14-2006 11:24 PM

Re: Filling Block... How To.... UPDATED

haha yeh i read the whole thing. just wondering if its worked for anyone else. how many miles u gone so far?

J-MAN

01-03-2007 03:19 PM

Re: Filling Block... How To.... UPDATED

i have 2 spare d series blocks sitting here but only really plan on building one at the moment but maybe build the other in the future. would there be enough to fill 2 blocks or should i get extra?

turbo4life

01-16-2007 01:07 AM

Re: Filling Block... How To.... UPDATED

1 Attachment(s)

i got my filled block motor running no overheating wat so ever.. its a d16y7 and dx head my ex head screwd up and chewd up the center cam cap/ bearing... and its not boosted yet i cant install my turbo till after the 24 thats when i have to do CHP inspection for my air bags and ----... i got 300 miles on my motor so far still breaking it it...
ill keep you guys posted.. http://E:\peter\turbod16 build\P1000528.JPG

All times are GMT -5. The time now is 11:49 AM.

Page 25 of 35

« First

Last »

Show 40 post(s) from this thread on one page