Re: Filling Block... How To.... UPDATED
wow.. and my vitars have grey wear areas on the thrust side.. i guess the machine shop screwed up and bored my motor too much
|
Re: Filling Block... How To.... UPDATED
Originally Posted by turbo4life
wow.. and my vitars have grey wear areas on the thrust side.. i guess the machine shop screwed up and bored my motor too much
99% of the people are installing them backwards w/ the arrow facing the crank pully... when they should actually be facing the flywheel, because of the offset of the wristpin. .020 offset in the wrong direction will have those effects along w/ desent piston slap. Just a thought.... about the issue ur experiencing I measuered the "stock" Honda pistons, and wisecos that I installed... and the same wristpin offset was on the Viteras.... but the arrows were facing the Flywheel... So that's the way I installed them...since the Suzuki motors are transverse of Hondas. Dr. Mike |
Re: Filling Block... How To.... UPDATED
Crafty.
|
Re: Filling Block... How To.... UPDATED
Originally Posted by crx304
Which way did u face the arrows on the Viteras???
99% of the people are installing them backwards w/ the arrow facing the crank pully... when they should actually be facing the flywheel, because of the offset of the wristpin. .020 offset in the wrong direction will have those effects along w/ desent piston slap. Just a thought.... about the issue ur experiencing I measuered the "stock" Honda pistons, and wisecos that I installed... and the same wristpin offset was on the Viteras.... but the arrows were facing the Flywheel... So that's the way I installed them...since the Suzuki motors are transverse of Hondas. Dr. Snoop O0 lol HMM interesting thanks for the tip yes i had the arrows to the crank pully :1 now ill put it to the fly wheel.. before i put the next vitara ----- together tomorrow |
Re: Filling Block... How To.... UPDATED
4 Attachment(s)
UPDATE MY VITARA MOTOR STATUS WHY IT FAILED (NOT REALLY JUST PURGING) WHY I TOOK IT OUT
ok i never payed attention to the cylinder head and the gasket glued to it. so i plealed it off guess what i see is black areas (cylinder pressure leaking?? anyone..) leading right into the water jacket in the two middle cylinders farther examining the head i realize how ruff the machine job is on the head and that i can feel it with my finger nail and comparing it to the other head i got back from the machine shop for the new motor its mirror finish.. i examine more... i see the ruff machine work and the valleys (low parts from the machine work) have black stuff in there so this guy did a shitty job on my head so i just waisted 1300 on the stupid B20/vtack swap :1 so i need to get some rods and put this motor back together with the arrow facing the right way this time.. lol cuz my brother is getting the other vitara build im making this is the ---- torn apart and fresh resurface and presure cheack + valve job and fresh hone on the block 353 dollas and the guy had to replace 3 valves like that it was 310 still not bad id say compared to the last machine shop i went to get this ---- build Attachment 16482 poor sexy turbo beast torn apart Attachment 16483 this is my borothers ---- box thats getting the vitara motor Attachment 16484 more pics of stuff ARP studs ect Attachment 16485 |
Re: Filling Block... How To.... UPDATED
----
clean your shop floor |
Re: Filling Block... How To.... UPDATED
looks like it had a dirt floor, but sometimes you just have to make due with what you have available, but ---- son lol.
|
Re: Filling Block... How To.... UPDATED
its a custom shop it only got a 3rd outer wall added a month ago it only had 2 walls and a roof its getting there no garage got to fix ---- up some how
|
Re: Filling Block... How To.... UPDATED
Originally Posted by crx304
Which way did u face the arrows on the Viteras???
99% of the people are installing them backwards w/ the arrow facing the crank pully... when they should actually be facing the flywheel, because of the offset of the wristpin. .020 offset in the wrong direction will have those effects along w/ desent piston slap. Just a thought.... about the issue ur experiencing I measuered the "stock" Honda pistons, and wisecos that I installed... and the same wristpin offset was on the Viteras.... but the arrows were facing the Flywheel... So that's the way I installed them...since the Suzuki motors are transverse of Hondas. Dr. Mike |
Re: Filling Block... How To.... UPDATED
ive been running it for about 18 k miles
|
All times are GMT -5. The time now is 12:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands