DOHC ZC questions!
08-16-2004, 11:59 PM
#1
1.5 BAR
Thread Starter
Join Date: Oct 2003
Posts: 1,107
DOHC ZC questions!
Hey i'm thinking of building the DOHC ZC up for higher boost.. what pistons/rods would i use and what arp headbolts would i use?? let me know some info on it.. i was going to build up a d16y8 but i wanna go non-vtec and DOHC.. let me know!!
Mason
Mason
08-17-2004, 02:24 AM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re:DOHC ZC questions!
Go with a set of eagle rods, any of the d16 series will work z6/a6 etc.
For pistons there is only 1 company that makes fi pistons for the ZC and thats Endyn, They are basically custom pistons designed by Larry that are manufactored by Wiseco.
http://www.theoldone.com/components/pistons/
That will take care of you on rods/pistons.
For ARP head studs read this write up
http://muller.net/sonny/crx/headstuds/
You basically want the VW kit, that is a 1/2 in longer.
Jeff
For pistons there is only 1 company that makes fi pistons for the ZC and thats Endyn, They are basically custom pistons designed by Larry that are manufactored by Wiseco.
http://www.theoldone.com/components/pistons/
That will take care of you on rods/pistons.
For ARP head studs read this write up
http://muller.net/sonny/crx/headstuds/
You basically want the VW kit, that is a 1/2 in longer.
Jeff
08-17-2004, 07:18 AM
#3
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:DOHC ZC questions!
Originally Posted by AbaZ
Go with a set of eagle rods, any of the d16 series will work z6/a6 etc.
For pistons there is only 1 company that makes fi pistons for the ZC and thats Endyn, They are basically custom pistons designed by Larry that are manufactored by Wiseco.
http://www.theoldone.com/components/pistons/
That will take care of you on rods/pistons.
For ARP head studs read this write up
http://muller.net/sonny/crx/headstuds/
You basically want the VW kit, that is a 1/2 in longer.
Jeff
For pistons there is only 1 company that makes fi pistons for the ZC and thats Endyn, They are basically custom pistons designed by Larry that are manufactored by Wiseco.
http://www.theoldone.com/components/pistons/
That will take care of you on rods/pistons.
For ARP head studs read this write up
http://muller.net/sonny/crx/headstuds/
You basically want the VW kit, that is a 1/2 in longer.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
