91backinblack

Ok so i finally got this bitch started, and now it wont rev past 3.5k? Well here is what i have:
D16z6
450 DSM injectors
B18 tb
A6 dizzy (staying obd0)
PM6 chipped my xenocron
MSD cap
MSD Balster 2 Coil
No o2 sensor
No turbo
Runs rich as ----
And wont rev past 3.5k
Has a hard time starting and its a hard time to keep it running.
Bogs really bad on the road.

I know the last few are because of having all that extra fuel and nothing pushing more air, but why is it bucking and wont rev past 3.5k?

Ogubudiah

any cels?
does the chip have a basemap on it or just stock d16 fuel maps?
try some 240 cc injectors

SmellySOHC

got that resistor box hookd up? chipped for 450s? check again my friend

91backinblack

No CELs, chipped for 450s, and it has a basemap. Could it just be because it is so rich? Could my timing be off?

FooK

limp mode owns you.

make sure xenocron soldered in a j1 jumper and its not trying to run off the stock fuel map.

87na_rx7

lol there is no cel, have you driven it yet? im thinking ftl owns him. your speedo work?

91backinblack

How do i tell about the jumper? And my speedo works. takes forever to turn over and start... when when it fires it like hits once and seems like it is firing to soon and slowing down the piston.

SmellySOHC

cool beans, never answered me, did u use a resistor box or resistors of some sort

J-MAN

lucky, he must of added the MAD TYte JDM limp mode option Y0!!

91backinblack

i used wirewound resistors... and i found out my toiming belt is off by a few cogs. Will that do it? It runs but backfies and ----.