Car wont rev past 3.5k
Ok so i finally got this bitch started, and now it wont rev past 3.5k???? Well here is what i have:
D16z6 450 DSM injectors B18 tb A6 dizzy (staying obd0) PM6 chipped my xenocron MSD cap MSD Balster 2 Coil No o2 sensor No turbo Runs rich as ---- And wont rev past 3.5k Has a hard time starting and its a hard time to keep it running. Bogs really bad on the road. I know the last few are because of having all that extra fuel and nothing pushing more air, but why is it bucking and wont rev past 3.5k? |
Re: Car wont rev past 3.5k
any cels?
does the chip have a basemap on it or just stock d16 fuel maps? try some 240 cc injectors |
Re: Car wont rev past 3.5k
got that resistor box hookd up? chipped for 450s? check again my friend
|
Re: Car wont rev past 3.5k
No CELs, chipped for 450s, and it has a basemap. Could it just be because it is so rich? Could my timing be off?
|
Re: Car wont rev past 3.5k
limp mode owns you.
make sure xenocron soldered in a j1 jumper and its not trying to run off the stock fuel map. |
Re: Car wont rev past 3.5k
Originally Posted by FooK
limp mode owns you.
make sure xenocron soldered in a j1 jumper and its not trying to run off the stock fuel map. |
Re: Car wont rev past 3.5k
How do i tell about the jumper? And my speedo works. takes forever to turn over and start... when when it fires it like hits once and seems like it is firing to soon and slowing down the piston.
|
Re: Car wont rev past 3.5k
cool beans, never answered me, did u use a resistor box or resistors of some sort????????????????????????????????????
|
Re: Car wont rev past 3.5k
lucky, he must of added the MAD TYte JDM limp mode option Y0!!
|
Re: Car wont rev past 3.5k
i used wirewound resistors... and i found out my toiming belt is off by a few cogs. Will that do it? It runs but backfies and ----.
|
All times are GMT -5. The time now is 04:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands